EN |
Display in "digital pointfinder" mode
Digital pointfinder (4x zoom)
The device has an integral digital pointfinder, which shows the target directly on the display. The displayed crosshairs allow precise measu- rements to be made even though the laser beam is not visible. See drawing {F.2}
The integral coloured digital pointfinder is a great help outdoors and can be used in every function. Longer distances and precise measurements on detailed surfaces can even be accomplished in bright sunlight without any problem.
The 4x zoom allows the image to be magnified to suit the user's requi- rements.
Press the 
key to activate the zoom function. Press the 
key again to operate in a 1x, 2x or up to 4x zoom view.
The brightness of the viewfinder can be adjusted through 5 levels using the
key or the 
key.
)Parallax errors occur when the digital pointfinder is used on close targets, the laser dot may appear displaced in the crosshair. In this case you should rely on the actual laser dot for targeting the object.
See drawing {F.2}
1Zoom step (1x, 2x, 4x)
2Timer
3Level (in °)
4Crosshairs
5Inclination angle
6Distance tracking value
7Image
Menu functions
Settings
Various device settings can be made in the menu. A vertical list shows each entry. In this menu the selection field (cursor) remains stationary and the list moves in a vertical direction. Starting from the centre of the list, the priority of list entries starts at the top and fans out clockwise. See drawing {G}.
The menu contains following items:
1Units of measurement (distance)
2Units of measurement (angle)
3Display illumination
4Long range mode
5Tripod
6Beep
7Offset
8Digital Pointfinder image in black/white
9Level in status field (in °)
10Reset
11Calibrate tilt sensor
Navigation in the menu
The menu allows settings to be customized for a particular user or applica- tion.
Menu functions
6
Leica DISTO™ D5 LCA782204a en