Leica 769459, 764553 Start-up, Labelling, Inserting/replacing batteries, Laser Class 2 products

Page 8

EN

Laser Class 2 products:

Do not stare into the laser beam or direct it towards other people

 

 

unnecessarily. Eye protection is normally afforded by aversion responses

 

including the blink reflex.

￿ WARNING:

Looking directly into the beam with optical aids (e.g. binoculars, telescopes) can be hazardous.

Precautions:

Do not look directly into the beam with optical aids.

￿CAUTION:

Looking into the laser beam may be hazardous to the eyes.

Precautions:

Do not look into the laser beam. Make sure the laser is aimed above or below eye level. (particularly with fixed installations, in machines, etc.)

Labelling

Laser Radiation

Do not stare into the beam

Laser class 2

acc. IEC 60825-1:2007

Maximum radiant power:

<1mW

Emitted wavelength:

620-690nm

Beam divergence:

0.16 x 0.6 mrad

Pulse duration:

1 x 10 -9s

 

 

 

 

 

 

 

 

Start-up

Inserting/replacing batteries

See figure {A}

1Remove battery compartment lid and attach handstrap.

2Insert batteries, observing correct polarity.

3Close the battery compartment again. Replace the batteries when the symbol flashes permanently in the display.

)Remove the batteries before any long period of non-use to avoid the danger of corrosion.

)We recommend the usage of AA size max. 1,5V lithium batteries or rechargable NiMH batteries. The Leica DISTO™ also works with Alkaline batteries but the battery lifetime will be reduced.

￿ WARNING:

This Leica DISTO™ was delivered with high quality non-rechargable lithium batteries. Wrong usage of lithium batteries can be hazardous.

Precautions:

Please do not recharge these batteries.

Do not mix lithium batteries with other types of batteries.

Do not use batteries if their casing is damaged.

Position of the product label see last page!

Start-up

4

Leica DISTO™ D5 LCA782204a en

Image 8
Contents Leica Disto D5 Page Leica Disto D5 Page Contents Safety InstructionsSymbols used Use of the instrumentPrecautions Limits of useAreas of responsibility Hazards in useElectromagnetic Compatibility EMC Laser classificationFCC statement applic. in U.S Integrated distancemeterStart-up LabellingInserting/replacing batteries Laser Class 2 productsDisplay in normal mode Changing the reference point multifunctional endpieceKeypad See figure EDisplay in digital pointfinder mode SettingsMenu functions Digital pointfinder 4x zoomSetting the unit for tilt measurements Setting the unit for distance measurementsLong range Mode Display illuminationReset returning the instrument to the factory settings BeepOffset Digital pointfinder image black / whiteOperation Measuring Volume FunctionsOverview of the program icons Addition / subtractionDirect horizontal distance Trapezoid measurement Trapezoid measurementTilt measurement Rements and the perimeter Triangle Stake out functionIndirect measurement Indirect Measurement determining a distance using Sweep the laser up and down over the ideal target pointMeasurement of the partial lengths As possibleTimer self-triggering AppendixHistorical storage Message codesTechnical data Distance measurementsTilt measurements GeneralWarranty CareMeasuring range Target surfacesPage Exit Leica Disto D5 Switzerland Translation of original text LCA782204a