General description
Press and hold the 
key to enter the Setup menu.
By pressing the 
or 
keys, navigate through the main menu items in the menu.
Press the 
key briefly to enter the submenu of the selected main menu item.
By pressing the 
or 
keys you can make the alterations in the submenu.
Press and hold the 
key to accept the settings.
Pressing the 
button for longer in the menu allows you to quit the settings function without saving.
Setting the unit for tilt measurements
The following units can be set for tilt measurements:
Units for tilt
2.1+/- 0.0°
2.20.00%
2.3mm/m
2.4in/ft
Display illumination (
)
The brightness of the display has six levels of adjustment. Step 6 is the brightest and step 1 is the darkest setting.
EN |
Setting the unit for distance measurements
The following units can be set:
| Distance | Area | Volume | |
1.1 | 0.0000 m | 0.000 m² | 0.000 m³ | |
|
|
|
| |
1.2 | 0.000 m | 0.000 m² | 0.000 m³ | |
1.3 | 0.00 m | 0.000 m² | 0.000 m³ | |
|
|
|
| |
1.4 | 0.00 ft | 0.00 ft² | 0.00 ft³ | |
|
|
|
|
|
1.5 | 0'00'' | 1/ | 0.00 ft² | 0.00 ft³ |
|
| 32 |
|
|
1.6 | 0'00'' | 1/ | 0.00 ft² | 0.00 ft³ |
|
| 16 |
|
|
1.7 | 0'00'' | 1/ | 0.00 ft² | 0.00 ft³ |
|
| 8 |
|
|
1.8 | 0'00'' | 1/ | 0.00 ft² | 0.00 ft³ |
|
| 4 |
|
|
1.9 | 0.0 in |
| 0.00 ft² | 0.00 ft³ |
|
|
|
| |
1.10 | 0 1/32 in | 0.00 ft² | 0.00 ft³ | |
1.11 | 0 1/16 in | 0.00 ft² | 0.00 ft³ | |
1.12 | 0 1/8 in | 0.00 ft² | 0.00 ft³ | |
1.13 | 0 1/4 in | 0.00 ft² | 0.00 ft³ | |
1.14 | 0.000 yd | 0.000 yd² | 0.000 yd³ | |
Long range Mode ( )
Unfavourable conditions (strong sunlight or a very weak reflective target surface) may reduce the range of the device, in spite of this the long range mode allows you to take measurements over longer distances. The use of
a tripod and measurement initiation by pressing the 
key are recom- mended when measurements over 30m are made over longer time periods in these conditions. (For details see Technical specifications)
)The settings are reset when the device is switched off.
Measuring with the tripod ( )
The reference point may be adjusted to the tripod mount if the user requires a measurement from the actual mounting grommit versus the
front or back of the DISTO. To do this select the symbol in this menu item. You can switch the reference on the tripod on or off. The setting can be seen on the display 
.
Leica DISTO™ D5 LCA782204a en
7