Changing the reference point (multifunctional endpiece)
See figure {B}
The instrument can be adapted for the following measuring situations:
•For measurements from an edge, fold out the positioning bracket until it first locks in place. See figure {C}.
•For measurements from a corner, open the positioning bracket until it locks in place, then push the positioning bracket lightly to the right to fold it out fully. See figure {D}.
A
Keypad
See figure {E}:
1ON / DIST (On/measuring) button
2Digital pointfinder - button
3Timer button
4Plus (+) button
5Minus
6Area / volume button
7Indirect measurement (Pythagoras) button
8Trapezoid button
9Functions button
10Reference button
11Storage/Memory button
12Clear/Off button
13Menu/Equal button
Display in normal mode
See drawing {F.1}.
The graphics screen of the measurement window is split into different areas. Top left is the brightest field, which contains the currently selected measuring program. Just to the right appears the program submenu, which shows the measuring programs that can be selected by pressing the same key the required number of times.
The measurement field contains the individual measurements of the measuring program with reference to a series of separate distance measu- rements. Three lines are provided for this. A horizontal line separates the measurement field and the result bar from one another. A red triangle indicates whether the selected measuring program has a detailed display available.
1Program selection with measurement instructions
2Program selection submenu
3Level
4Timer
5Measurement field
6Result bar
7Detailed display
8Status bar with (Laser ON, Reference plane, Display Long range mode, Offset, Plus / Minus, Battery status)
EN |
Leica DISTO™ D5 LCA782204a en
5