Sears 315.11485 manual Unpacking, Instructions, Packing List

Page 10

UNPACKING

INSTRUCTIONS

When unpacking the tool:

nCarefully remove the tool and accessories from the box.

nMake sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-932-3188 for assistance.

PACKING LIST

1/2 in. Drill

1 Hour Charger

Battery Pack (2) Double-ended Bit (2) Operator’s Manual Case

WARNING: If any parts are missing do not operate the tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

10

Image 10

Contents Operators Manual Warranty Table of ContentsIntroduction Personal Safety General Safety RulesElectrical Safety Work AreaRules for Battery Tools Specific Safety RulesService Additional Rules for Safe OperationSafety Instructions for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Specifications Features Instructions UnpackingPacking List Information for Recharging Cool Battery Pack Battery PackCharging Battery Pack OperationTo Remove Battery Pack To Install Battery PackTWO-SPEED Gear Train Drill BIT Switch Forward TriggerReversible Lock Tighten Chuck BodyTo Adjust Torque Installing BitsAdjustable Torque Clutch Removing BitsDrilling Screwdriver BIT BIT Storage AreaMallet Chuck Jaws Chuck RemovalTo Retighten a Loose Chuck Mallet HEX KEYBattery Pack Removal and Preparation for Recycling MaintenanceBatteries Page See Back page for Parts Ordering Instructions Parts List Craftsman 1/2 in., 19.2 Volt Cordless DRILL-DRIVER Model noGet it fixed, at your home or ours Operators Manual ONE Year Full Warranty on Craftsman Tool Model Battery Pack Charger Electrical SafetyPersonal Safety Work AreaCauses and Operator Prevention of Kickback Laser Guide Warnings Safety Rules for Charger Symbols Service Product Specifications Spindle Lock Button Laser Guide RIPAssembly Latches Battery Pack Installing Battery PackAttaching Blade Spindle Lock Screw To Loosen Installing Edge GuideRemoving Blade To Tighten EdgeCharging a Cool Battery Pack Charging the Battery PackApplications Charging a HOT Battery Pack Incorrect Support KickbackCorrect Support Kickback SAW Blades Lower Blade Guard Is in UP Position When Making a CUTSwitch Trigger Blade Exposed on Underside of Workpiece Blade Guard SystemDepth Base Assembly Tighten Adjusting Blade DepthUsing the Laser Guide Adjustment KnobOperating the SAW Wrong Correct WR ONGCross CUTTING/RIP Cutting Bevel Cutting To Adjust Bevel SettingBevel Adjustment Knob Scale Blade Guide Notch Bevel ScalePositive 0 Bevel Stop To Adjust Positive 0 Bevel StopTo Check Positive 0 Bevel Stop Pocket Cutting AdjustmentsAdjusting the Laser Pocket CUT Lower Blade GuardLubrication General MaintenanceReplacing Laser Guide Batteries Battery Pack Removal Preparation for Recycling AccessoriesBatteries 3733 Number ModelCraftsman 19.2 Volt Cordless Trim SAW Model Number KEY Part Number Description QTYVolt Reciprocating Saw Variable Speed Table of Contents General Safety Rules Specific Safety Rules Safety Rules for Charger Symbols Service Volts DC Toolless Blade Clamp SwitchKnow Your Reciprocating SAW HEX KEY HolderAssembly Battery Pack Shown Charger To Remove To Remove / Attach Battery PackBattery Port Battery Pack Latch To Install SAW Blade To AttachGeneral Cutting Base Shoe AssemblyTo Change Positions of Base Assembly PivotPlunge Cutting Metal CuttingMaintenance Blade Types Length Craftsman 19.2 Volt Reciprocating SAW Model no See Back page for Parts Ordering InstructionsGet it fixed, at your home or ours Volt Fluorescent Light Warranty General Safety Rules Specific Safety Rules Important Safety Instructions for Charger Symbols Operation Switch Maintenance Battery Pack Removal and Preparation for Recycling Page Get it fixed, at your home or ours