Sears 28.71234 operating instructions Important Safety Instructions

Page 3

IMPORTANT: read and save this safety and instruction manual.

1.IMPORTANT SAFETY INSTRUCTIONS

1.1SAVE THESE INSTRUCTIONS – The DieHard model 71234 Manual Bat- tery Charger, offers a wide range of features to accommodate

the needs for home or light commercial use. This manual will show you how to use your charger safely and effectively. Please read and follow these instructions and precautions carefully as this manual contains im- portant safety and operating instructions.

1.2Do not expose charger to rain or snow.

1.3Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to per- sons.

1.4To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.

1.5An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure:

•That pins on plug of extension cord are the same number, size, and shape as those of plug on charger;

•That extension cord is properly wired and in good electrical condition and;

•That wire size is large enough for AC ampere rating of charger as speci- fied in Table 8.3.

1.6Do not operate charger with damaged cord or plug; take to a qualified service person. (Call customer service at: 800-SEARS-64.)

1.7Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. (Call customer service at: 800-SEARS-64.)

1.8Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. (Call customer service at: 800-SEARS-64.)

1.9To reduce risk of electric shock, unplug charger from outlet before attempt- ing any maintenance or cleaning. Turning off controls will not reduce this risk.

WARNING – RISK OF EXPLOSIVE GASES.

WORKING IN VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE CHARGER.

To reduce risk of battery explosion, follow these instructions and those published by battery manufac-

•1 •

Page 2 Page 4
Image 3
Page 2 Page 4
Contents OPERATOR’S Manual Table of Contents Important Safety Instructions Preparing to Charge Personal PrecautionsDC Connection Precautions Follow These Steps When Battery is Installed in ve- hicleCharger Location Page Page Grounding Methods Parts Replacement Parts List DieHard Description Part NumberParts Tools Needed Charger features Assembly instructionsTo attach the axle assembly Page Battery Voltage Select Using the gfci outletSetting the Controls Power ON/OFF SwitchTime Increment SettingsRate MaximumCharger is in Manual mode Charge Rate in ampsVoltage Engine Start Battery is charged Automatic modeTimer mode There is a problem with the battery or connectionsCharge Rate Battery SIZE/RATING Charging Time Hours AMP Amp Hours = Reserve Capacity +Specific Gravity Percent of Charge Needed Example Charger SettingCharger Setting Hours Using the engine start featureStorage instructions Maintenance instructionsProblem Possible Cause SOLUTION/REASONS TroubleshootingTHREE-YEAR Full Warranty WarrantyPage
Top Page Image Contents