Agilent Technologies N6700 manual Agilent Models N6773A N6776A, DC Output Ratings

Appendix A Specifications

Agilent Models N6773A - N6776A

Performance Specifications

	N6773A	N6774A	N6775A	N6776A
DC Output Ratings:
Voltage	20 V	35 V	60 V	100 V
Current NOTE 1	15 A NOTE 2	8.5 A	5 A	3 A
Power	300 W	300W	300 W	300 W
Output Ripple and Noise (PARD):
(from 20 Hz – 20 MHz)
CV peak-to- peak	20 mV	22 mV	35 mV	45 mV
CV rms	3 mV	5 mV	9 mV	18 mV
Load Effect (Regulation):
(with output change from no load to full load, up to a maximum load-lead drop of 1V/lead)
Voltage	13 mV	16 mV	24 mV	45 mV
Current	6 mA	6 mA	6 mA	6 mA
Source Effect (Regulation):
Voltage	2 mV	4 mV	6 mV	10 mV
Current	1 mA	1 mA	1 mA	1 mA

Programming Accuracy:

(@ 23 °C ±5 °C after 30 minute warm-up. Applies from minimum to maximum programming range)

Voltage	0.1% + 20 mV	0.1% + 35 mV	0.1% + 60 mV	0.1% +100 mV
Current	0.15% + 60 mA	0.15% + 60 mA	0.15% + 60 mA	0.15% + 30 mA

Measurement Accuracy: (at 23 °C ±5 °C)

Voltage	0.1% + 20 mV	0.1% + 35 mV	0.1% + 60 mV	0.1% +100 mV
Current	0.15% + 15 mA	0.15% + 12 mA	0.15% + 12 mA	0.15% + 6 mA

Load Transient Recovery Time:

(time to recover to within the settling band following a load change from 50% to 100% and from 100% to 50% of full load.)

Voltage settling band	± 0.3 V NOTE 3	± 0.3 V NOTE 3	± 0.5 V	± 1.0 V
Time	< 250 ∝s	< 250 ∝s	< 250 ∝s	< 250 ∝s

1Output current is derated 1% per °C above 40°C.

2When relay Option 760 is installed, the maximum output current will be limited to 10 A.

3When relay Option 760 or 761 is installed, the settling band is ±0.35 V.

84 Series N6700 User’s Guide