Subaru Robin Power Products R1300 manual Rotor Screw the bolt into the thread

rotor shaft.

5.Torque the bolt using a socket wrench until the rotor comes off loose.

* The hydraulic pressure inside the rotor shaft takes apart the rotor fromthe engine shaft.

(4) Wipe off oil throughly from rotor shaft and enginePTO shaft.

Fig. 10-24

14.Front bracket (1) Remove the frontbracket,which is

mountedonthemainbearingcover of the engine, by taking out four M8 X 18 bolts. (SeeFig. 10-25.)

Fig. 10-25

-

RemarksTool

12mm box spanner or Socketwrench

12mm boxspanner