Patton electronic 4110 user manual SmartNode 4520 Series factory configuration

SmartNode 4520 & 4110 Series User Manual F • SmartNode 4520 Series factory configuration

Introduction

The factory configuration settings for SmartNode 4520 Series devices are as follows:

#----------------------------------------------------------------	#
#	#
# 4520 Series	#
# Factory configuration file	#
#	#
#----------------------------------------------------------------	#
dns-relay
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system
ic voice 0
low-bitrate-codec g729
profile napt NAPT
profile dhcp-server DHCP
network 192.168.1.0 255.255.255.0
include 1 192.168.1.10 192.168.1.99
lease 2 hours
default-router 1 192.168.1.1
domain-name-server 1 192.168.1.1
context ip router
interface eth0
ipaddress dhcp
use profile napt NAPT
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface eth1
ipaddress 192.168.1.1 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
dhcp-server use DHCP
port ethernet 0 0
medium auto
encapsulation ip
bind interface eth0 router
no shutdown
port ethernet 0 1
medium auto
encapsulation ip
bind interface eth1 router
no shutdown

Introduction 76