Hobart Welding Products OM-945 manual Oil Drain Valve 2 ID x 7 in Hose Oil Filter, Full, Fuel Line

8-6. Changing Engine Oil, Oil Filter, and Fuel Filter (Robin-Powered Units)

! Stop engine and let cool.

1 Oil Drain Valve

2 1/2 ID x 7 in Hose

3 Oil Filter

Change engine oil and filter ac- cording to engine owner’s manual.

!

Close valve and valve cap

before adding oil and running engine.

	Fill crankcase with new oil to full
Full	mark on dipstick (see Section 8-2).
	4	Fuel Filter
	5	Fuel Line

Replace line if cracked or worn. Install new filter. Wipe up any spilled fuel.

Start engine, and check for fuel leaks.

!

4

Stop engine, tighten

connections as necessary, and wipe up fuel.

5

3

2

1

Tools Needed:

802 353-G / S-0842

OM-945 Page 30