G-Converter Chassis
Supervisor Terminal Emulation
The Manager Card supports several terminal emulations. When connection is made between the terminal and the RS232 Supervisor port, the following screen will appear:
Please select terminal type from the following:
1 = VT52
2 = VT100
3 = ADDSVP
4 = ADM3A
5 = H1500
6 = N8009
7 = TVI920
The terminal type or emulation in use should be selected by pressing the relevant number key on the PC or terminal. The terminal will then show the basic configuration screen for the chassis’s
You may return to this screen at any time by pressing ‘CTRL’ and ‘E’ at the same time.
General set-up Display Layout
There are three main areas on the Supervisor
Upper left –
System parameters
Upper right –
Other display pages which may be selected.
Bottom –