![](/images/new-backgrounds/1258935/25893529x1.webp)
G-Converter Chassis
Abandoning Changes
Pressing ESC at any point before a configuration is updated will cause the message “Abandon Changes? (y/n)” to appear at the bottom of the screen. If “n” is selected, the message will disappear and editing may continue. If “y” is pressed, all modifications will be abandoned and the last updated configuration will be
Changing the Configuration Page
The Configuration Page required, e.g. “Alarms”, is selected by moving the cursor to the upper right area and pressing Enter when alongside the required page. The currently selected page is indicated by a ‘*’.
Restoring the Factory Default Configuration
The system may be reset to the factory default configuration by pressing
TECHNICAL: 0118 931 2233 15