Black Box RMU200 manual Converter Chassis

Page 32

G-Converter Chassis

Mains accessibility

WARNING: The mains socket outlet must be installed near the equipment and must be easily accessible.

Exposed Mains.

WARNING: When the Power Supply Modules are removed from the Card Cage, the connector on the back plane will contain mains voltage. Do not insert anything other than a Power Supply Module into the exposed aperture of the Card Cage System.

Earth point.

WARNING: The central earth point for the Card Cage System is located on the right hand panel of the Card Cage (when viewed from the front) This stud is marked with an earth symbol and should on no account be tampered with.

Fuse Operation.

WARNING: Failure of one mains fuse will not necessarily remove mains power totally.

Fuse.

WARNING: Only to be replaced with a 5 x20mm 1.0A anti-surge fuse.

Mains Isolation

WARNING: To isolate unit form mains supply BOTH IEC sockets must be disconnected.

32 SALES: 0118 965 5100

Image 32 Contents
Converter Chassis Converter Chassis Converter Chassis Contents Converter Chassis Converter System’s Chassis Introduction OverviewManager Card Removal of Manager Card Power SuppliesManager Card LED Indication Installation Environmental ConsiderationsCard Cage System Channel CardsManagement Overview Supervisor Terminal Emulation Supervisor Port terminal managementSupervisor Terminal Requirements Typical Configuration Display General set-up Display LayoutAccepting all changes and Updating the Configuration General Keyboard ConventionsCursor Movement Parameter ChangingAbandoning Changes Changing the ConfigurationRestoring the Factory Default Configuration Base-T Port Telnet Management Supervisor Terminal Requirements Typical Configuration Display General Keyboard Conventions Telnet Screen Ethernet Screen IP Screen Alarms Screen Events Screen Snmp Management Configuration Sales 0118 965 Typical Configuration Display General Keyboard Conventions Abandoning Changes Diagnostics Power SupplyFan Assembly Snmp TrapsInstallation of Equipment Appendix A- WarningsConverter Chassis Appendix B -Approval Requirements 703/G.704Appendix C EMC Requirements DCD