Southbend sb1018 owner manual About This Machine, Capabilities, Features

Model SB1018 I N T R O D U C T I O N For Machines Mfg. Since 8/09

INTRODUCTION

About This Machine

Capabilities

This metal cutting bandsaw uses a gravity-fed blade to make straight cuts through workpieces that are clamped in a vise. Since the workpiece is secured and remains stationary while the blade lowers automatically, accuracy and operator safety are maximized.

The vise on the Model SB1018 is capable of holding rectangular stock up to 5" x 6" and round stock up to 5".

After a cut is complete, the OFF switch is triggered and the motor automatically turns off.

Features

In addition to its capabilities, the Model SB1018 has several features to increase versatility and efficiency.

The headstock can be rotated to make angled cuts from -45°–60° while three blade speeds ensure that the proper cutting rate is available for a variety of workpiece sizes and materials.

Both the downfeed rate and pressure are adjustable for fine-tuning each cutting operation and an adjustable auto-OFF power switch maximizes safety and minimizes energy use by turning the machine off at the end of every cut.

A storage compartment in the cabinet base provides a convenient location for keeping spare blades or other accessories and the transport handle makes moving the machine easy.

Finally, the cast-aluminum knobs and belt cover proudly bear the legendary South Bend name.

-2-