Delta Machinery Manuals for 36-250 and 36-240 Miter Saws

Page 1

Sidekick

10" Compound Slide Saw

(Models 36-240 and 36-250)

Bench Model 36-240 Shown

PART NO. 902096 (014)

Copyright © 2001 Delta Machinery

To learn more about DELTA MACHINERY	ESPAÑOL: PÁGINA 33
visit our website at: www.deltamachinery.com.
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

INSTRUCTION MANUAL

Image 1

Contents Sidekick Compound Slide Saw Always Wear EYE Protection Safety RulesAdditional Safety Rules for Compound Slide Saws Power Connections Connecting Tool to Power SourceMotor Specifications Grounding InstructionsExtension Cords Unpacking and CleaningOperating Instructions Bench Model Stand Model AssemblyPage For models 36-240 Moving Cuttinghead to the Rear PositionAssembling Dust Elbow and Dust BAG Raising CuttingheadAssembling Work Clamp Moving Table to the 90 Degree CUT-OFF PositionLocking Switch OFF Position Operating Controls and AdjustmentsStarting Stopping Machine Rotating Table for Miter CuttingAdjusting Clamping Action Table Locking Mechanism Adjusting Fence Degrees to Blade Adjusting Sliding FIT Between Movable Table and BaseTable Hazard Area Tilting Cuttinghead for Bevel Cutting Work Clamp OperationAdjusting Sliding FIT Between Trunnion and Bevel Bracket Adjusting 90 and 45 Degree Bevel Positive Stops Adjusting Tension of Cuttinghead Return Spring Adjusting Blade GuardAdjusting Sliding FIT Between Upper ARM and Trunnion Adjusting Sliding FIT Between Guide Rods and Table Assembly Adjusting Downward Travel SAW BladeLocking Cuttinghead Guide Rods Tool StorageUsing Auxiliary Fence AS a Stock Stop Adjusting Table Extensions Auxiliary FencesFolding Stand For Transportation Removing SAW from Stand Page For ALL Models Fastening the SAW to a WorkbenchUsing SAW with 2 X 4 Extensions Using the SAW on SAW HorsesOperation Correct Operating Procedure for Slide CuttingReplacing SAW On Stand Page Using SAW AS Chop SAW Using the Work Clamp and Stock StopDado Cutting Cutting Crown Moulding Changing the Blade MaintenanceBrush Inspection and Replacement PARTS, Service or Warranty Assistance AccessoriesPage Canadian PORTER-CABLE Delta Service Centers