Delta 36-250, 36-240 instruction manual Folding Stand For Transportation

FOLDING STAND

FOR TRANSPORTATION

(FOR MODEL 36-250 ONLY)

1.Lock cuttinghead in the down and outward position. Rotate table to the 45 degree right angle position. Extension tables and fences should be pushed in toward the saw table and locked in place.

2.Loosen two locking knobs (G) Fig. 55. While holding legs (A), as shown, press spring-loaded detents (B) with your thumbs and carefully lower upper legs. Tighten locking knobs (G) Fig. 55.

3.Fig. 56, illustrates the left leg (C) lowered. Lower the right leg (D) in the same manner.

B

B

G

A

A

G

Fig. 55

D

C

Fig. 56

4.Unlock hinges on left leg and fold left leg (C) in, as shown in Fig. 57.

5.Tilt machine on its side, as shown in Fig. 58, and continue to fold left leg (C) all the way underneath saw base. Leg (C) will contact and unlock hinges (E) of right leg (D), enabling right leg (D) to be folded.

C

Fig. 57

E D

C

Fig. 58

20