Delta 33-830 instruction manual PARTS, Service or Warranty Assistance, Two Year Limited Warranty

Page 27

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

WARNING: Since accessories, other than those offered by Delta, have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

Printed in U.S.A.

27

Image 27
Contents 10″ Professional Radial Arm Saw General Safety Rules Extension Cords Additional Safety Rules for Radial ARM SawsPower Connections Motor SpecificationsGrounding Instructions Overload Protection Changing VoltageFunctional Description Unpacking and CleaningPage Explanation of Operating Controls Assembly Tools Needed for Assembly and AdjustmentAssembling Legs to SAW Base Removing Blade and Blade Guard from SAW Disconnect Tool from Power SourceAssembling Track ARM Clamp Lever Assembling Adjusting Table SupportsContacts the table board before the motor is fully Track ARM Clamp Handle Y are Assembling Table Board Clamps and Table Boards Adjusting and Checking SAW Blade Travel Square to FencePage Removing Heeling in SAW Blade CUT Checking and Adjusting SAW Blade Square To TableAdjusting IN/OUT RIP Scale Tongue on Guard Seats Into Groove of CUTTING-HEAD Assembling Blade and Blade Guard to MachineCutting Into Table Boards Fastening SAW to the FloorON/OFF Switch Adjusting Ball Bearings Against TrackMotor Changing Position of Track ARM Clamping Handle Adjusting Tension on Elevating ColumnChanging Position of Yoke Clamp Handle Changing Position of Bevel Clamp HandleAdjusting Splitter and ANTI-KICKBACK Fingers Positive Stop Yoke IndexPositive Stop Bevel Index CROSS-CUT Stop Using a Table ExtensionAuxiliary Table Board Facing OperationsIN-RIPPING Compound Miter CuttingRipping OUT-RIPPINGConstructing a Push Stick PushstickTwo Year Limited Warranty PARTS, Service or Warranty AssistancePage Canadian PORTER-CABLE Delta Service Centers