Bosch Power Tools 1660, 1662 manual General Safety Rules, For All Battery Operated Tools

Page 2

BM 2610914527 3/03 3/18/03 10:47 AM Page 2

 

 

General Safety Rules

 

 

For All Battery Operated Tools

 

 

 

 

 

Read and understand all instructions. Failure to follow all instructions listed

 

! WARNING

 

 

below, may result in electric shock, fire and/or serious personal injury.

 

 

 

 

SAVE THESE INSTRUCTIONS

Work Area

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep by-standers, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords im- mediately. Damaged cords may create a fire.

A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire.

Personal Safety

Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents.

Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect battery pack from tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other

-2-

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Operating/Safety Instructions General Safety Rules For All Battery Operated ToolsSafety Rules for Circular Saws ServiceCauses and Operator Prevention Kickback Battery/Charger Battery Care NICKEL-CADMIUM BatteriesSymbols Functional Description and Specifications Cordless Circular SawsVARI-TORQUE Clutch AssemblyAttaching the Blade Dust ExtractionOperating Instructions Depth AdjustmentSafety Switch Cutting Angle CheckSwitch Bevel AdjustmentAdjustable Line Guide BrakeRIP Cuts Pocket CutsCutting Large Sheets RIP Board GuideImportant Charging Notes Releasing and Inserting Battery PackCharging Battery Pack 1 Hour Charger Maintenance Accessories Sécurité des personnes Aire de travailSécurité électrique Utilisation et entretien des outilsConsignes de sécurité pour scies circulaires RéparationDU Rebond Chargeur de pile Le plomb provenant des peintures à base de plombPiles NICKEL-CADMIUM Entretien des pilesMise au rebut des piles Piles NICKEL-HYDRURE DE MétalSymboles Outil Capacités maximales Description fonctionnelle et spécificationsScies circulaires Sans fil ChargeurLoutil AssemblageMontage DE LA Lame Extraction DE PoussièreInterrupteur DE Sûreté Consignes de fonctionnementRéglage DE LA Profondeur DE Coupe Vérification DE L’ANGLE DE CoupeInterrupteur Réglage DE LA Coupe EN BiseauGuide D’ALIGNEMENT Réglable FreinPlacez le panneau ou la planche sur des supports situés Coupes EN GuichetCoupe DE Grandes Feuilles Coupes DE RefenteRemarques Importantes Concernant LA Charge Dépose ET Repose DU BLOC-PILESCharge DU BLOC-PILE Chargeur DE 1 Heure Nettoyage MaintenanceEntretien Accessoires Seguridad personal Area de trabajoSeguridad eléctrica Utilización y cuidado de las herramientasNormas de seguridad para sierras circulares ServicioPOR EL Operador Batería/cargador Baterias DE NIQUEL-CADMIO Cuidado de las bateríasEliminación de las baterías Baterias DE NIQUEL-HIDRURO MetalicoDe Ni-Cd SímbolosCon aislamiento doble Sin cordón Descripción funcional y especificacionesSierras circulares Herramienta Capacidades máximasDesconecte el paquete de EnsamblajeColocacion DE LA Hoja Ajustes o cambiar accesorios. Dichas medidasInterruptor DE Sequridad Instrucciones de funcionamientoAjuste DE Profundidad Verificacion DEL Angulo DE Corte DE 90˚Guia DE Interruptor Ajuste DE InclinacionGuia DE Linea Ajustable FrenoCortes AL Hilo Cortes DE BolsillosCorte DE Planchas Grandes TABLERO-GUIA Para Cortar AL HiloNotas Importantes Para Cargar Liberacion E Insercion DEL Paquete DE BateriasCarga DEL Paquete DE Baterias Cargador DE 1 Hora Mantenimiento LimpiezaAccesorios CapacidadLimited Warranty of Bosch Portable and Benchtop Power Tools

1660, 1662 specifications

Bosch is renowned for its range of high-quality power tools, and the Bosch Power Tools 1662 and 1660 models are no exceptions. Designed for both professional tradespeople and DIY enthusiasts, these power tools combine cutting-edge technology with user-friendly features to deliver exceptional performance and reliability.

The Bosch 1662 is known for its robust design and versatility. It is a corded power tool that provides consistent power for various applications, enabling users to tackle heavy-duty tasks with ease. One of its standout features is the adjustable speed control, which allows operators to customize the tool's RPM based on the specific material being worked on. This adaptability makes it suitable for a wide range of applications, from drilling into wood to working with metal.

The 1662 also incorporates a built-in electronic feedback system that maintains speed under load, ensuring smooth operation and preventing stalling during demanding tasks. Additionally, it features an ergonomic design with a soft-grip handle, providing comfort during prolonged use. This model is also equipped with an integrated spindle lock for easy bit changes, enhancing efficiency and convenience.

Turning to the Bosch 1660, this model shares many of the same qualities but boasts its unique set of specifications that cater to specific needs. The 1660 is particularly favored for its lightweight design, making it an excellent choice for users who prioritize portability. Despite its lighter weight, the 1660 does not compromise on power, offering sufficient torque for various drilling, chiseling, and fastening tasks.

Like its counterpart, the 1660 features variable speed control, allowing users to fine-tune their drilling performance. Its durable construction ensures longevity, while the combination of vibration control technology enhances user comfort, reducing fatigue during extended use.

Both models are equipped with high-quality motors that deliver impressive power while maintaining energy efficiency. Bosch's commitment to innovation is evident in the features and technology embedded in these models, ensuring that users can rely on their tools for professional-grade results. Overall, whether you choose the 1662 or the 1660, both power tools exemplify Bosch's dedication to quality and performance, making them excellent additions to any toolkit.
Top Page Image Contents