Carrier specifications 06D Compressor Unit Dimensions

Page 3

NOTES:

1.For standard service practices, such as trouble-

shooting and refrigerant charging, allow a minimum 2′-6″ clearance around the unit.

2.For compressor removal, allow a minimum 3′ wide access aisle to and from the unit.

3.Local codes or jurisdiction may prevail for unit clearances.

Fig. 2 — 06D Compressor Unit Dimensions

3

Image 3

Contents Installation ContentsBefore Installation Safety ConsiderationsB212 Unit 07D Width aA203 B205 A208 B21006D Compressor Unit Dimensions Electrical Connections LLS EquipGND HPSGround Connection Switch Low-Pressure Switch Timer RelayCrankcase Heater Overload Relay Control Relay Recommended Field Wiring Refrigerant Charging Initial START-UPChecking Operation Switch Type Switch Position Pressure Change AffectingClosed Capacity Control Pressure Fig Condenser MaintenanceCapacity Control Valve Operation Range Usage PER ServiceService Notes Size Threads TorquePhase Barrier Positioning KEY see FIG Removing Pump End Bearing Head Pump END Compressor Part Compressor Model MAX* AllowWear Motor ENDCompressor Running Gear Removal Cleaning Suction StrainerCompressor Motor Burnout Compressor Running Gear ReplacementProblem Cause Remedy TroubleshootingHot liquid line System noisesCompressor loses oil Frosted suction lineCopyright 2002 Carrier Corporation