Getting to know your saw

2	ELEVATION	HANDWHEEL	... elevates or
	Iowersthe blade, Turnclockwiseto elevate, counter-
3	clockwise to lower.
	TILT HANDWHEEL...tilts		the blade for bevel
	cutting. Turn clockwise to tilt toward left, counter-
	clockwise to tilt toward dght.
	When the blade is tilted to the LEFT as far as itwill
	go, it should be at 45" to the table and the bevel
	pointer should point 45 °.
	NOTE: There are LIMIT STOPS inside the saw
	which prevent the blade from tilting beyond 45 ° to
	the LEFT and 90° to the RIGHT. ( See "ADJUST-
	MENT,<;AND ALIGNMENTS"section"BLADE TILT,
4	OR SQUARENESS OF BLADE TO TABLE").
	TILT LOCK	HANDLE...	locks the blade inthe
	desired tilt position. To loosen, turn counterclock-
	wise. Push handle in and turn it to another position
5	if necessary in order to tighten or loosen.
	RIP FENCE...	islocked in place by pushing the
	Lock Lever down until the lever rests on the stop. To

move the Fence, lift the Lock Lever and grasp the Fence with one hand at the front.

Holes are provided in the Rip Fence for attaching a wood facing when using the Dado Head, or Molding Head.

Select a piece of smooth straight wood approxi- mately 3/4 inch thick, and the same size as the Rip

Fence.

Attach it to the Fence with three Round Head #10 Wood Screws, 2 inches long. TO removethe facing, loosen the screws, slide the facing forward and pull the screws through the round holes.

WOOD FACING t

6MITER GAUGE .., headislockedin positionfor

crosscutting or rnitedng by tighteningthe Lock Knob.

ALWAYS LOCK IT SECURELY WHEN IN USE.

Gauge to cut miters.

NOTE: The slots for the Stop Pin and the gradu- ations are manufactured to very close tolerances which provide accuracy for average woodworking. In some cases where extreme accuracy is required,

when making angle cuts. forexample, make a trial cut and then recheck it.

If necessary, the Miter Gauge head can then be swiveled slightlyto compensate and then locked.

Slots are provided in the Miter Gauge for attaching an Auxiliary Facing to make it easier to cut long pieces. Be positive Facing does not interfere with the proper operation of the Sawblade Guard.

Select a suitable piece of smooth straight wood, ddll two holes through it and attach it with screws.

NOTE: When bevel crosscutting, attach Facing so

that it extendsto the dght of the Miter Gauge and use the Miter Gauge in the groove to the righl of the blade.

	FACING
STb.PI. +s+soT \	I I-
FO.STO..,.
7 BLADEGUARD...must	always be in place and

working properly for all thru-sawingcuts. That is, all cuts where the blade cuts completely through the workpiece.

To remove the Guard for special operations, loosen the Thumbscrew and slide the Guard off of the Rod.

DO NOT DISTURB THE SETTING OF THE ROD.

When replacing the Guard, make sure the PIN inthe Rod engages with the NOTCH in the Spreader Support. Make sure Thumbscrew is tightened se- curely.

8TABLE INSERT... is removable for removing or installing blades or other cutting tools.

SCREW

A, Lower the blade below the table surface.

B.F_aiseBlade Guard.

C.Loosen screw.

D.Lift insert from front end, and pull toward front of saw.

298721, 113.298721, 113.298761 specifications

The Craftsman 298721, also known by its model numbers 113.298721 and 113.298761, represents a well-crafted power tool that has gained popularity among DIY enthusiasts and professionals alike. This versatile tool is designed to facilitate a variety of woodworking and construction tasks, making it an invaluable addition to any workshop.

One of the standout features of the Craftsman 298721 is its robust build quality. Crafted from durable materials, this tool is designed to withstand the rigors of heavy use. Its sturdy construction not only ensures longevity but also enhances user safety, as it can endure demanding tasks without compromising performance.

Equipped with a powerful motor, the Craftsman 298721 delivers consistent performance across various applications. The high horsepower ensures that it can easily handle tough materials, allowing users to make precise cuts and achieve desired outcomes effortlessly. The motor is also designed to operate quietly, mitigating the noise commonly associated with power tools and providing a more pleasant working environment.

Another notable characteristic is its user-friendly design. The tool features an ergonomic handle that provides a comfortable grip, reducing fatigue during extended periods of use. This attention to ergonomics is evident in the lightweight build, making it easier for users to maneuver the tool with ease.

In terms of technology, the Craftsman 298721 incorporates advanced features that enhance its usability. One such feature is its adjustable speed control, allowing users to tailor the tool's performance to specific tasks. This adaptability makes it suitable for a wide range of applications, from intricate detail work to heavier cutting jobs.

The tool's compatibility with various attachments further extends its utility. Users can easily switch between different blades and accessories, enabling them to tackle diverse projects without the need for multiple tools. This flexibility makes the Craftsman 298721 a cost-effective solution for those looking to streamline their workshop.

Additionally, the safety mechanisms integrated into the Craftsman 298721 ensure that users can operate the tool confidently. Features such as blade guards and lock-off switches provide an extra layer of protection, reducing the risk of accidents while working.

In summary, the Craftsman 298721, alongside its model numbers 113.298721 and 113.298761, is a versatile and reliable power tool that combines robust construction, powerful performance, user-friendly features, and advanced technology. Whether for professional contractors or home improvement enthusiasts, this tool stands out as an essential asset for any workshop.