Glossary of terms for woodworking

Sawblade Path

The area ofthe workpiece or table top directly in linewith the part of the workpiece which will be, or has been, cut by the blade.

Set

The distance thatthe tip ofthe sawblade tooth isbent (or set) outward from the face of the blade.

Throw-BaCk

Throwing of pieces in a manner similar to a kickback.

Thru-Sawing

Any cutting operation where the blade extends com- pletely though the thickness of the workpiece.

Trailing End

The workpiece end last cut by the blade in a ripping operation.

Workpiece

The item on which the cutting operation is being done. The surfaces of a workpiece are commonly referred to as faces, ends, and edges.

motor specifications and electrical requirements

This saw is designed to use a 3450 RPM motoronly. Do not use any motor that runs faster than 3450 RPM. It is wired for operation on 120 volts. 60 Hz., alternating current. IT MUST NOT BE CONVERTED TO OPER- ATE ON 230 VOLTS.

CAUTION: Do not use blower or washing machine motors or any motor with an automatic reset over- load protector as their use may be hazardous. For replacement motor, refer to parts list in this manual,

CONNECTING TO POWER SOURCE OUTLET

This saw must be grounded while in use to protect the operator from electrical shock.

Itpower cord isworn or cut, of damaged in any way, have it replaced immediately.

Your saw is wired for 120 volts and has a plug that looks like the one shown below.

3-PRONG PLUG

occurs, there isthe potential of a secondary hazard, such as your hands contacting the sawblade.

This saw is equipped with a 3-conductor cord and grounding type plug which has a grounding prong, approved by UndenNriters'Laboratories and the Cana- dian Standards Association. The ground conductor has a green lug and isattached to the tool housing at one end and to the ground prong in the attachment plug at the other end.

This plug requires a mating 3-conductor grounding type outlet as shown.

If the outlet you are planning to use for this saw is of the

two prong type, DO NOT REMOVE OR ALTER THE

GROUNDING PRONG IN ANY MANNER. Use an adapter as shownbelow and always connect the ground- ing lug to a known ground.

It is recommended that you have a qualified electrician replace the TWO prong outlet with a properly grounded

THREE prong outlet.

GROUNDING LUG

I_MAKE SURE THIS IS

3-PRONG

_'_

L _ _.-_=CONNECTED

TO A

PLUG_ :._ " l___ II KNOWN GROUND

/.EC,.T,C'E

ADAPTER

Atemporary adapter, as shown, is available for connect- ing plugs to 2-prong receptacles. The green grounding lug extending from the adapter must be connected to a perrnanent ground such asto a properly grounded outlet box. This adapter should be used only until a properly

If you are not sure that

plug

can incur the

plumbing,

298721, 113.298721, 113.298761 specifications

The Craftsman 298721, also known by its model numbers 113.298721 and 113.298761, represents a well-crafted power tool that has gained popularity among DIY enthusiasts and professionals alike. This versatile tool is designed to facilitate a variety of woodworking and construction tasks, making it an invaluable addition to any workshop.

One of the standout features of the Craftsman 298721 is its robust build quality. Crafted from durable materials, this tool is designed to withstand the rigors of heavy use. Its sturdy construction not only ensures longevity but also enhances user safety, as it can endure demanding tasks without compromising performance.

Equipped with a powerful motor, the Craftsman 298721 delivers consistent performance across various applications. The high horsepower ensures that it can easily handle tough materials, allowing users to make precise cuts and achieve desired outcomes effortlessly. The motor is also designed to operate quietly, mitigating the noise commonly associated with power tools and providing a more pleasant working environment.

Another notable characteristic is its user-friendly design. The tool features an ergonomic handle that provides a comfortable grip, reducing fatigue during extended periods of use. This attention to ergonomics is evident in the lightweight build, making it easier for users to maneuver the tool with ease.

In terms of technology, the Craftsman 298721 incorporates advanced features that enhance its usability. One such feature is its adjustable speed control, allowing users to tailor the tool's performance to specific tasks. This adaptability makes it suitable for a wide range of applications, from intricate detail work to heavier cutting jobs.

The tool's compatibility with various attachments further extends its utility. Users can easily switch between different blades and accessories, enabling them to tackle diverse projects without the need for multiple tools. This flexibility makes the Craftsman 298721 a cost-effective solution for those looking to streamline their workshop.

Additionally, the safety mechanisms integrated into the Craftsman 298721 ensure that users can operate the tool confidently. Features such as blade guards and lock-off switches provide an extra layer of protection, reducing the risk of accidents while working.

In summary, the Craftsman 298721, alongside its model numbers 113.298721 and 113.298761, is a versatile and reliable power tool that combines robust construction, powerful performance, user-friendly features, and advanced technology. Whether for professional contractors or home improvement enthusiasts, this tool stands out as an essential asset for any workshop.