Craftsman 137.21237 IAWARNmNO, Body and Hand Position FIG. R, To Turn SAW on FIG. S

Page 18

BODY AND HAND POSITION (FIG. R)

(AWARNINO[

Never place hands near the cutting area. Proper positioning of your body and hands when operating the miter saw will make cutting easier and safer. Keep children away. Keep aH visitors at a safe distance from the miter saw. Make sure bystanders are clear of the saw and workpiece. Don't force the

saw. It will do the job better and safer at its designed rate.

Starting a cut:

oPlace hands at least 7=1/2 in. away from the path of the blade - out of the "no-handszone" (1).

•Hold workpiece firmly against the fence to prevent movement toward the blade.

•With the power switch OFF, bring the saw blade

down to the workpiece to see the cutting path of the blade.

= Squeeze trigger switch to start saw.

•Lower blade into workpiece with a firm downward motion.

Finishing a cut:

o Hold the cutting arm in the down position.

oRelease trigger switch and wait for all moving parts to stop before moving your hands and raising the cutting arm

oIf the blade doesn't stop within 6 seconds, unplug the saw and follow the instructions in TROUBLESHOOTING GUIDE section for

adjusting the blade brake before using the saw again.

Before freeing jammed material: 6 Release trigger switch.

oWait for all moving parts to stop.

• Unplug the miter saw.

Fig. R

•# l

7-I/2 in_'''° 7-1/2 in.

BASIC SAW OPERATIONS

[AWARNINGJ

For your convenience, your saw has a blade brake. The brake is not a safety device. Never rely on it to replace the proper use of the guard on your saw.

If the blade doesn't stop within approximately 6

seconds, wait for the blade to stop, unplug the saw and contact customer service.

TO TURN SAW ON (FIG. S)

Squeeze the trigger switch (I) to turn the miter saw ON. Release the trigger switch to turn the saw OFF.

NOTE: Make the ON/OFF switch chiidproof. Insert a padlock, or chain with padlock, through the holes (2) in the trigger switch, locking the tool's switch, preventing

children and other unqualified users from turning the machine on.

The miter saw is equipped with an automatic blade brake. When the trigger switch is released, the electric

blade brake will stop the blade within approximately 6 seconds.

(A WARNING[

To avoid injury, after completing a cut and releasing the trigger switch, allow the blade brake to activate and stop the blade before raising the cutting head.

IAWARNmNO

To avoid injury, check and tighten the arbor bolt periodically.

Fig. S

I

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents CRSFrSMSN Model NoBlade Ection PAG E SectionMotor Miter SAW Rotating TableDisconnect Tools from Power Source USE Proper Extension CORDS. Make sureCheck for Damaged PARTS. Check for Keep the Motor AIR Slots Clean and free of chips or dust Power Supply and Motor SpecificationsMotor Safety Protection Double InsulatedIL Warning Recommended AccessoriesAccessories Combination Square Must be TrueIA Warning Unpacking Your Miter SAWPage Woodworking Terms Unlocking the Slide Carriage FIG. B Estimated Assembly Time 5 10 minutesINSTALLiNG the Dust BAG FIG. D RaisingIAWARNmNG INSTALLiNG the HOLD-DOWN ClampWARNINe Mounting the Miter SAW FIG. G, G=IRemoving and Installing the Blade MountinginstructionsLaser Guide FIG. K From turning the machine onAvoid Direct EYE Contact Bevel Stop Adjustment Bevel Adjustment Fig. NMiter Scale Indicator Adjustment FIG. O Miter Angle Adjustment FIG. OSetting Cutting Depth FIG. Q Adjusting Fence Squareness FIG. PRecommended Accessories Before Using the Miter SAWSafety and Operations Sections Keep Your Work Area CleanPlan Your Work Dress for SafetyWhen SAW is Running Do not OverreachBody and Hand Position FIG. R Before freeing jammed material 6 Release trigger switchIAWARNmNO To Turn SAW on FIG. SBefore Leaving the SAW WAR.mr,JGISliding Carriage System FIG Miter CUT FIG. UCompound CUT FIG IAWANiGIBevel Stop for Crown Molding FIG. W Slide Cutting Wide Boards UP to 12 in. WideCutting Bowed Material FIG. Z Auxiliary Wood Fence FIG. CCCutting Crown Molding FIG. EE, FF Bevel/Miter SettingsCuttingbasemolding FIG. DD Inside corner-Left sideCrown Molding Chart Maintenance AWARmGIAwARJG Problem Cause Suggested Corrective Action Problem Problem Cause Suggested Corrective ActionParts List for SAW Schematic 10INSUDINGCOMPOUNDMtTESAW.MODEL.O137.212370Schematic for SAW Parts List and Schematic for Motor SAW ModelPage Your Home

137.21237 specifications

The Craftsman 137.21237 table saw is a versatile and robust woodworking tool that caters to both amateur and professional woodworkers. Renowned for its reliability and precision, this table saw has made a mark in the DIY community and among seasoned craftspeople alike.

One of the standout features of the Craftsman 137.21237 is its powerful motor. With a 15-amp motor, it provides ample power to tackle a variety of cutting tasks. This motor facilitates smooth cuts through hardwoods and thick materials, ensuring that users experience consistent performance without lag. The saw comes equipped with a 10-inch blade that spins at impressive RPMs, allowing for clean, efficient cuts across different types of wood and plywood.

Another key characteristic of this table saw is its durable construction. The table surface is made of cast iron, providing a stable base that minimizes vibrations during operation. This stability is crucial for achieving accuracy in cuts, especially for intricate projects that require precise measurements. The table itself measures a generous size, allowing for larger workpieces to be cut with ease.

The Craftsman 137.21237 also boasts an advanced rip fence system. The fence is designed for quick adjustments, enabling users to make straight, consistent cuts at various widths. The easy locking mechanism ensures that your settings remain in place while cutting, enhancing safety and accuracy.

Safety is a paramount concern with the Craftsman 137.21237. It features an integrated blade guard, which provides protection against accidental contact with the blade. Additionally, the saw includes riving knife technology, which helps prevent kickback by keeping the wood aligned during cuts. This safety technology is crucial for woodworkers looking to minimize risk while operating powerful equipment.

Portability is another important aspect of the Craftsman 137.21237. Despite its sturdy build, the saw is designed with user convenience in mind. It includes onboard storage for accessories and additional parts, as well as a foldable stand, making it easy to transport and store when not in use.

In summary, the Craftsman 137.21237 table saw combines power, durability, and precision. With its strong 15-amp motor, robust cast iron construction, advanced safety features, and user-friendly design, it stands out as a reliable choice for anyone engaged in woodworking projects. Whether you're building furniture, crafting cabinetry, or undertaking home improvement tasks, this table saw provides the functionality and performance that can enhance your woodworking experience.
Top Page Image Contents