Craftsman 137.21237 Recommended Accessories, IL Warning, Combination Square Must be True

Page 6

RECOMMENDED ACCESSORIES

[AWARNING[

•Use only accessories recommended for this miter saw. Follow instructions that accompany

accessories. Use of improper accessories may cause hazards.

•The use of any cutting tool except 10 inch saw blades which meet the requirements under recommended accessories is prohibited. Do not use accessories such as shaper cutters or dado sets. Ferrous metal cutting and the use of

abrasive wheels is prohibited.

=Do not attempt to modify this tool or create accessories not recommended for use with

this tool. Any such alteration or modification is misuse and could result in a hazardous condition

leading to possible serious injury.

ACCESSORIES

Visit your Sears Hardware Department or see the Sears Power and Hand Tool Catalog to purchase recommended accessories for this power tool.

[_IL WARNING I

To avoid the risk of personal injury, do not modify this power tool or use accessories not recommended by Sears.

[_IL WARNING I

Read warnings and conditions on your CARBIDE TIPPED SAW BLADE. Do not operate the saw without the proper saw blade guard in place. Carbide is a very hard but brittle material Care should be taken while mounting, using and storing carbide tipped blades to prevent accidental damage. Slight shocks, such as striking the tip while handling, can seriously damage the blade. Foreign objects in the workpiece, such as wire or nails, can also cause tips to crack or break off. Before using, always visually examine the blade and tips for bent blade, cracks, breakage, missing or loose tips, or other damage. Do not use if damage is suspected. Failure

to heed safety instructions and warnings can result in serious bodily injury.

SuppliedNot supplied

Blade Wrench

....................

Adjustable Wrench

Hex Key

Combination Square

Phillips Screwdriver

Slotted Screwdriver

COMBINATION SQUARE MUST BE TRUE

Should not gap or overlap when square is flipped over (see dotted figure).

 

Straight edge or

 

a 3,/4 in. board,

Draw light line on board

this edge

must be

perfectly

straight.

along this edge.

 

 

r_

t

f

I

t

Gap from untrue square when flipped over.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CRSFrSMSN Model NoBlade Ection PAG E SectionMotor Miter SAW Rotating TableDisconnect Tools from Power Source USE Proper Extension CORDS. Make sureCheck for Damaged PARTS. Check for Keep the Motor AIR Slots Clean and free of chips or dust Power Supply and Motor SpecificationsMotor Safety Protection Double InsulatedIL Warning Recommended AccessoriesAccessories Combination Square Must be TrueIA Warning Unpacking Your Miter SAWPage Woodworking Terms Unlocking the Slide Carriage FIG. B Estimated Assembly Time 5 10 minutesINSTALLiNG the Dust BAG FIG. D RaisingIAWARNmNG INSTALLiNG the HOLD-DOWN ClampWARNINe Mounting the Miter SAW FIG. G, G=IRemoving and Installing the Blade MountinginstructionsLaser Guide FIG. K From turning the machine onAvoid Direct EYE Contact Bevel Stop Adjustment Bevel Adjustment Fig. NMiter Scale Indicator Adjustment FIG. O Miter Angle Adjustment FIG. OSetting Cutting Depth FIG. Q Adjusting Fence Squareness FIG. PRecommended Accessories Before Using the Miter SAWSafety and Operations Sections Keep Your Work Area CleanPlan Your Work Dress for SafetyWhen SAW is Running Do not OverreachBody and Hand Position FIG. R Before freeing jammed material 6 Release trigger switchIAWARNmNO To Turn SAW on FIG. SBefore Leaving the SAW WAR.mr,JGISliding Carriage System FIG Miter CUT FIG. UCompound CUT FIG IAWANiGIBevel Stop for Crown Molding FIG. W Slide Cutting Wide Boards UP to 12 in. WideCutting Bowed Material FIG. Z Auxiliary Wood Fence FIG. CCCutting Crown Molding FIG. EE, FF Bevel/Miter SettingsCuttingbasemolding FIG. DD Inside corner-Left sideCrown Molding Chart Maintenance AWARmGIAwARJG Problem Cause Suggested Corrective Action Problem Problem Cause Suggested Corrective ActionParts List for SAW Schematic 10INSUDINGCOMPOUNDMtTESAW.MODEL.O137.212370Schematic for SAW Parts List and Schematic for Motor SAW ModelPage Your Home

137.21237 specifications

The Craftsman 137.21237 table saw is a versatile and robust woodworking tool that caters to both amateur and professional woodworkers. Renowned for its reliability and precision, this table saw has made a mark in the DIY community and among seasoned craftspeople alike.

One of the standout features of the Craftsman 137.21237 is its powerful motor. With a 15-amp motor, it provides ample power to tackle a variety of cutting tasks. This motor facilitates smooth cuts through hardwoods and thick materials, ensuring that users experience consistent performance without lag. The saw comes equipped with a 10-inch blade that spins at impressive RPMs, allowing for clean, efficient cuts across different types of wood and plywood.

Another key characteristic of this table saw is its durable construction. The table surface is made of cast iron, providing a stable base that minimizes vibrations during operation. This stability is crucial for achieving accuracy in cuts, especially for intricate projects that require precise measurements. The table itself measures a generous size, allowing for larger workpieces to be cut with ease.

The Craftsman 137.21237 also boasts an advanced rip fence system. The fence is designed for quick adjustments, enabling users to make straight, consistent cuts at various widths. The easy locking mechanism ensures that your settings remain in place while cutting, enhancing safety and accuracy.

Safety is a paramount concern with the Craftsman 137.21237. It features an integrated blade guard, which provides protection against accidental contact with the blade. Additionally, the saw includes riving knife technology, which helps prevent kickback by keeping the wood aligned during cuts. This safety technology is crucial for woodworkers looking to minimize risk while operating powerful equipment.

Portability is another important aspect of the Craftsman 137.21237. Despite its sturdy build, the saw is designed with user convenience in mind. It includes onboard storage for accessories and additional parts, as well as a foldable stand, making it easy to transport and store when not in use.

In summary, the Craftsman 137.21237 table saw combines power, durability, and precision. With its strong 15-amp motor, robust cast iron construction, advanced safety features, and user-friendly design, it stands out as a reliable choice for anyone engaged in woodworking projects. Whether you're building furniture, crafting cabinetry, or undertaking home improvement tasks, this table saw provides the functionality and performance that can enhance your woodworking experience.
Top Page Image Contents