Craftsman 137.21237 WAR.mr,JGI, Sliding Carriage System FIG, Before Leaving the SAW

Page 19

SLIDING CARRIAGE SYSTEM (FIG. 1")

[A WARNING

To reduce the risk of injury, return carriage to the full rear position after each crosscut operation.

I.For chop cutting operations on small workpieces, slide the cutting head assembly completely toward the rear of the unit and tighten the carriage lock knob (1).

2.To cut wide boards up to 12 in., the carriage lock knob must be loosened to allow the cutting head to slide freely.

Fig. T

BEFORE LEAVING THE SAW

,Never leave tool running unattended. Turn power OFF. Wait for all moving parts to stop.

®Make workshop childproof. Lock the shop. Disconnect master switches. Store tool away from children and other unqualified users.

[A wAR.mr,JGI

To avoid injury from materials being thrown, always unplug the saw to avoid accidental starting, and remove small pieces of material from the table cavity.

MITER CUT (FIG. U)

I.When a miter cut is required, unlock the miter table by turning the miter handle (1) counterclockwise.

2.While holding the miter handle, lift up on the positive stop locking lever (2).

3.Rotate the miter table to the right or left with the miter handle.

When the table is in the desired position, as shown on the miter scale (3), release the positive stop locking lever and tighten the miter handle. The table is now locked at the desired angle. Positive stops are provided at 0°, 15°, 225 °, 31.6 ° and 45°. IMPORTANT: Always tighten the miter table lock handle before performing every cutting operation.

Fig. U

BEVEL CUT (FIG. V)

1.When a bevel cut is required, loosen the bevel lock handle (1) by turning it clockwise.

2.Tilt the cutting head to the desired angle, as shown on the bevel scale (2).

3.The blade can be positioned at any angle, from a 90° straight cut (0° on the scale) to a 45 ° left bevel. Tighten the bevel lock handle (1) to lock the cutting head in position. Positive stops are provided at 0°,

33.9° and 45 °1

Fig. V

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model No CRSFrSMSNRotating Table Ection PAG E SectionMotor Miter SAW BladeUSE Proper Extension CORDS. Make sure Disconnect Tools from Power SourceCheck for Damaged PARTS. Check for Power Supply and Motor Specifications Keep the Motor AIR Slots Clean and free of chips or dustDouble Insulated Motor Safety ProtectionCombination Square Must be True Recommended AccessoriesAccessories IL WarningUnpacking Your Miter SAW IA WarningPage Woodworking Terms Raising Estimated Assembly Time 5 10 minutesINSTALLiNG the Dust BAG FIG. D Unlocking the Slide Carriage FIG. BMounting the Miter SAW FIG. G, G=I INSTALLiNG the HOLD-DOWN ClampWARNINe IAWARNmNGMountinginstructions Removing and Installing the BladeFrom turning the machine on Laser Guide FIG. KAvoid Direct EYE Contact Bevel Adjustment Fig. N Bevel Stop AdjustmentAdjusting Fence Squareness FIG. P Miter Angle Adjustment FIG. OSetting Cutting Depth FIG. Q Miter Scale Indicator Adjustment FIG. OKeep Your Work Area Clean Before Using the Miter SAWSafety and Operations Sections Recommended AccessoriesDo not Overreach Dress for SafetyWhen SAW is Running Plan Your WorkTo Turn SAW on FIG. S Before freeing jammed material 6 Release trigger switchIAWARNmNO Body and Hand Position FIG. RMiter CUT FIG. U WAR.mr,JGISliding Carriage System FIG Before Leaving the SAWSlide Cutting Wide Boards UP to 12 in. Wide IAWANiGIBevel Stop for Crown Molding FIG. W Compound CUT FIGAuxiliary Wood Fence FIG. CC Cutting Bowed Material FIG. ZInside corner-Left side Bevel/Miter SettingsCuttingbasemolding FIG. DD Cutting Crown Molding FIG. EE, FFCrown Molding Chart AWARmG MaintenanceIAwARJG Problem Problem Cause Suggested Corrective Action Problem Cause Suggested Corrective Action10INSUDINGCOMPOUNDMtTESAW.MODEL.O137.212370 Parts List for SAW SchematicSchematic for SAW SAW Model Parts List and Schematic for MotorPage Your Home

137.21237 specifications

The Craftsman 137.21237 table saw is a versatile and robust woodworking tool that caters to both amateur and professional woodworkers. Renowned for its reliability and precision, this table saw has made a mark in the DIY community and among seasoned craftspeople alike.

One of the standout features of the Craftsman 137.21237 is its powerful motor. With a 15-amp motor, it provides ample power to tackle a variety of cutting tasks. This motor facilitates smooth cuts through hardwoods and thick materials, ensuring that users experience consistent performance without lag. The saw comes equipped with a 10-inch blade that spins at impressive RPMs, allowing for clean, efficient cuts across different types of wood and plywood.

Another key characteristic of this table saw is its durable construction. The table surface is made of cast iron, providing a stable base that minimizes vibrations during operation. This stability is crucial for achieving accuracy in cuts, especially for intricate projects that require precise measurements. The table itself measures a generous size, allowing for larger workpieces to be cut with ease.

The Craftsman 137.21237 also boasts an advanced rip fence system. The fence is designed for quick adjustments, enabling users to make straight, consistent cuts at various widths. The easy locking mechanism ensures that your settings remain in place while cutting, enhancing safety and accuracy.

Safety is a paramount concern with the Craftsman 137.21237. It features an integrated blade guard, which provides protection against accidental contact with the blade. Additionally, the saw includes riving knife technology, which helps prevent kickback by keeping the wood aligned during cuts. This safety technology is crucial for woodworkers looking to minimize risk while operating powerful equipment.

Portability is another important aspect of the Craftsman 137.21237. Despite its sturdy build, the saw is designed with user convenience in mind. It includes onboard storage for accessories and additional parts, as well as a foldable stand, making it easy to transport and store when not in use.

In summary, the Craftsman 137.21237 table saw combines power, durability, and precision. With its strong 15-amp motor, robust cast iron construction, advanced safety features, and user-friendly design, it stands out as a reliable choice for anyone engaged in woodworking projects. Whether you're building furniture, crafting cabinetry, or undertaking home improvement tasks, this table saw provides the functionality and performance that can enhance your woodworking experience.
Top Page Image Contents