Craftsman 137.21237 Cutting Bowed Material FIG. Z, Auxiliary Wood Fence FIG. CC

Page 21

CUTTING BOWED MATERIAL (FIG. Z)

A bowed workpiece must be positioned against the fence and secured with a cramping devise before cutting as shown. Do not position workpiece incorrectly or try to cut the workpiece without the support of the fence. This will cause the blade to bind and could result in personal injury.

Fig. Z

WORKPIECE SUPPORT AND REPETiTiVE CUTTING USING THE STOP PLATE (FIG, BB)

Long pieces need extension table support.

1.Loosen the knob (1) then slide the extension table to desired position and tighten the knob.

2.The stop plate is designed for use during repetitive cutting. Only use one stop plate at a time. Loosen the locking bolt (2), rotate the stop plate (3) to vertical position and retighten the locking bolt.

Fig. BB

2

AUXILIARY WOOD FENCE (FIG. CC)

When making multiple or repetitive cuts that result in cut-off pieces of one inch or less, it is possible for the saw blade to catch the out=off piece and throw it out of the saw or into the blade guard and housing, possibly causing damage or injury. To minimize this, an auxiliary wood fence can be mounted to your saw.

Holes are provided in the saw fence to attach an auxiliary wood fence. This fence is to be constructed of straight wood approximately 3/4 in. thick by 2-I/2 in. high by 18 in. long.

Attach the wood fence securely and make a full depth cut to make a blade slot.

Check for interference between the wood fence and the lower blade guard. Adjust if necessary.

NOTE: This auxiliary fence is used only with the saw blade in the 0° bevel position (90 ° to the table). The auxiliary wood fence must be removed when bevel cutting.

Fig. CC

Blade Slot

2I

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model No CRSFrSMSNMotor Miter SAW Ection PAG E SectionBlade Rotating TableDisconnect Tools from Power Source USE Proper Extension CORDS. Make sureCheck for Damaged PARTS. Check for Power Supply and Motor Specifications Keep the Motor AIR Slots Clean and free of chips or dustDouble Insulated Motor Safety ProtectionAccessories Recommended AccessoriesIL Warning Combination Square Must be TrueUnpacking Your Miter SAW IA WarningPage Woodworking Terms INSTALLiNG the Dust BAG FIG. D Estimated Assembly Time 5 10 minutesUnlocking the Slide Carriage FIG. B RaisingWARNINe INSTALLiNG the HOLD-DOWN ClampIAWARNmNG Mounting the Miter SAW FIG. G, G=IMountinginstructions Removing and Installing the BladeLaser Guide FIG. K From turning the machine onAvoid Direct EYE Contact Bevel Adjustment Fig. N Bevel Stop AdjustmentSetting Cutting Depth FIG. Q Miter Angle Adjustment FIG. OMiter Scale Indicator Adjustment FIG. O Adjusting Fence Squareness FIG. PSafety and Operations Sections Before Using the Miter SAWRecommended Accessories Keep Your Work Area CleanWhen SAW is Running Dress for SafetyPlan Your Work Do not OverreachIAWARNmNO Before freeing jammed material 6 Release trigger switchBody and Hand Position FIG. R To Turn SAW on FIG. SSliding Carriage System FIG WAR.mr,JGIBefore Leaving the SAW Miter CUT FIG. UBevel Stop for Crown Molding FIG. W IAWANiGICompound CUT FIG Slide Cutting Wide Boards UP to 12 in. WideAuxiliary Wood Fence FIG. CC Cutting Bowed Material FIG. ZCuttingbasemolding FIG. DD Bevel/Miter SettingsCutting Crown Molding FIG. EE, FF Inside corner-Left sideCrown Molding Chart Maintenance AWARmGIAwARJG Problem Problem Cause Suggested Corrective Action Problem Cause Suggested Corrective Action10INSUDINGCOMPOUNDMtTESAW.MODEL.O137.212370 Parts List for SAW SchematicSchematic for SAW SAW Model Parts List and Schematic for MotorPage Your Home

137.21237 specifications

The Craftsman 137.21237 table saw is a versatile and robust woodworking tool that caters to both amateur and professional woodworkers. Renowned for its reliability and precision, this table saw has made a mark in the DIY community and among seasoned craftspeople alike.

One of the standout features of the Craftsman 137.21237 is its powerful motor. With a 15-amp motor, it provides ample power to tackle a variety of cutting tasks. This motor facilitates smooth cuts through hardwoods and thick materials, ensuring that users experience consistent performance without lag. The saw comes equipped with a 10-inch blade that spins at impressive RPMs, allowing for clean, efficient cuts across different types of wood and plywood.

Another key characteristic of this table saw is its durable construction. The table surface is made of cast iron, providing a stable base that minimizes vibrations during operation. This stability is crucial for achieving accuracy in cuts, especially for intricate projects that require precise measurements. The table itself measures a generous size, allowing for larger workpieces to be cut with ease.

The Craftsman 137.21237 also boasts an advanced rip fence system. The fence is designed for quick adjustments, enabling users to make straight, consistent cuts at various widths. The easy locking mechanism ensures that your settings remain in place while cutting, enhancing safety and accuracy.

Safety is a paramount concern with the Craftsman 137.21237. It features an integrated blade guard, which provides protection against accidental contact with the blade. Additionally, the saw includes riving knife technology, which helps prevent kickback by keeping the wood aligned during cuts. This safety technology is crucial for woodworkers looking to minimize risk while operating powerful equipment.

Portability is another important aspect of the Craftsman 137.21237. Despite its sturdy build, the saw is designed with user convenience in mind. It includes onboard storage for accessories and additional parts, as well as a foldable stand, making it easy to transport and store when not in use.

In summary, the Craftsman 137.21237 table saw combines power, durability, and precision. With its strong 15-amp motor, robust cast iron construction, advanced safety features, and user-friendly design, it stands out as a reliable choice for anyone engaged in woodworking projects. Whether you're building furniture, crafting cabinetry, or undertaking home improvement tasks, this table saw provides the functionality and performance that can enhance your woodworking experience.
Top Page Image Contents