Craftsman 137.248830 SAW Mounted to Work Surface FIG. C, Blade Raising Handwheel FIG. E, F

Page 10

SAW MOUNTED TO WORK SURFACE (FIG. C)

1.If the leg set will not be used, the saw must be properly secured to a sturdy workbench using the four mounting holes at the base of the saw.

2.The surface of the table where the saw is to be mounted must have a hole large enough to facilitate sawdust fall-through and removal.

3.Square the saw on the mounting surface and mark the location of the four 3/8" mounting holes (1).

4.Drill four 3/8" holes into the mounting surface.

5.Mark an 11" square (2) centered between the four mounting holes (1).

6.Cut out and remove the square.

7.This opening will allow sawdust to fall through the saw base.

8.Place the saw on the work surface, and align the

mounting holes of the saw with those drilled through the surface.

9.Fasten the saw to the work surface.

14WARNING

Do notoperatethismachine on thefloorThisisvery. dangerousand may causeseriousinjury.

Fig,C

O

BLADE RAISING HANDWHEEL (FIG. E, F)

1.Attach the handwheel (1) to the elevation screw (2) at the front of the saw.

Make sure the slots (3) in the hub of the handwheel engage with the pins (4). (Fig. E)

2.Attach and tighten the dome nut (5) at the end of the shaft (Fig. F).

Fig. E

3 2 4

t

BLADE TILTING HANDWHEEL (FIG. G, F)

1.Attach the other handwheel (6) to the blade tilting screw on the side of the saw in the same manner as above.

2.Attach and tighten the handwheel dome nut (5).

Fig. F

O

14WARNING

Failure to provide the sawdust fall-through hole will cause

sawdust to build up in the motor area, which may result in

fire or cause motor damage,

Place the dust bag neck opening around the dust chute and tie the dust bag with string.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operators Manual SAW Full ONE Year WarrantyMotor 5000Sawing Operations IA Warningi AmputationsAWG type / 120 Volt only Any extension cord must be Grounded for safe operationMinimum Gauge for Extension Cords Event of a Malfunction orIk Warningi Unpacking Your Table SAW PqrstvwExtension wing Page Blade Raising Handwheel FIG. E, F SAW Mounted to Work Surface FIG. CBlade Tilting Handwheel FIG. G, F Installing and Changing the Blade FIG. H, I, J Iz,WARNINGlBlade Guard Assembly FIG. K, L, M Installing Table Side Extensions FIG. NAdjusting Rear Table Extension Installing the Table Side EXTENSIONS- contd FIG. OInstalling Rear Table Extension FIG. P RIP Fence Adjustment FIG. QStop RIP Fence Indicator Adjustment FIG. QAdjusting the 90 and 45 Positive Stops FIG.Q-I, Q-2,Q-3 Blade Tilting PointerIwarning Blade Parallel to the Miter Gauge Groove FIG. R,STilting the Blade FIG. T ON/OFF Switch FIG. URaise the Blade FIG. T Overload Protection FIG. UCutting Operations Ripping FIG. WCrosscutting FIG. Y Bevel RippingRipping Small Pieces Bevel Crosscutting FIG. ZAuxiliary Fence FIG. CC-1 Using Wood Facing on the RIP Fence FIG. CCMitering FIG. BB Making the baseFig. EE LubricationMakingany adjustments Symptom Possible Causes Corrective ActionAlways order by Model Number and I.D. number Schematic a QtyCO CO Schematic OT04 Table SAW Page Part list for Motor 113 Cut off here to Push 1/2 wood MY-HOME

137.248830 specifications

The Craftsman 137.248830 is a versatile and powerful table saw that has garnered attention among DIY enthusiasts and professional woodworkers alike. With its robust construction and user-friendly features, it stands out as a reliable choice for tackling a variety of woodworking projects.

One of the main attributes of the Craftsman 137.248830 is its precision. It comes equipped with a 10-inch blade that offers excellent cutting capabilities for a wide range of materials, including hardwood, plywood, and softwood. The saw utilizes a direct drive motor that delivers a powerful 15-amp output, ensuring consistent and efficient cutting performance.

Safety is a priority in this model, featuring an integrated blade guard system that protects users during operation. The saw also includes a riving knife, which helps prevent kickback by keeping the material aligned with the blade, enhancing overall safety while making cuts. Additionally, the push stick and safety switch are designed to further minimize risk, making it suitable for users of various skill levels.

Another prominent feature is its adjustable dual-sided fence system, which provides accurate and secure measurements for precise cuts. The fence can be easily adjusted, making it ideal for rip cuts as well as crosscuts. Furthermore, the measuring scale is clear and easy to read, allowing woodworkers to set up their projects quickly.

Portability is another characteristic that stands out. The Craftsman 137.248830 is designed with a foldable stand, making it easy to transport to job sites or store when not in use. Despite its sturdy construction, the saw remains lightweight enough for easy maneuverability.

Moreover, the onboard storage provides convenient access to all necessary tools, such as blades and wrenches, keeping everything organized . The dust port is also a noteworthy feature; it helps maintain a clean workspace by connecting to a dust extractor, which is essential for creating a safe working environment.

In summary, the Craftsman 137.248830 table saw combines power, precision, and safety features, making it a fantastic addition to any woodworking shop. Its reliable performance, user-friendly design, and portable nature cater to both amateur and professional woodworkers seeking quality in their tools.
Top Page Image Contents