Craftsman 137.248830 Blade Guard Assembly FIG. K, L, M, Installing Table Side Extensions FIG. N

Page 12

BLADE GUARD ASSEMBLY (FIG. K, L, M)

1.Set the blade to maximum height and the tilt to

zero degrees on the bevel scale with the hand wheels. Lock the blade lock knob.

2.Place the external toothed lock washer (1) ,a steel flat washer (2) and a spring washer (10) onto the long hex head bolt (3). Insert the bolt into the splitter bracket (4) as shown. (Fig. K)

Fig. K

1

10 3

3.Place the oval washer (5) on the pivot rod (6). (Fig. L)

4.Install the bracket assembly (4) at the rear of the saw table and snugly - do not tighten. Thread the bolt (3) into the internally threaded pivot rod.

NOTE: The splitter is removed from the illustration for clarity.

Fig. L

65

5.Raise the blade to the maximum height. (Fig. M)

6.Using a straight edge, check to see if the blade guard splitter (8) is aligned with the saw blade (9). Make sure the straight edge lies between the teeth of the blade when aligning.

7.If straightening adjustment is necessary, loosen the bolt (3) and shift the splitter assembly to right or left for proper alignment.

8.When the splitter is properly aligned with the saw blade, tighten the bolt, very tight.

9.If height adjustment is necessary, loosen the knob (11 ) and raise the splitter assembly to the desired height and tighten the knob. (Fig. K)

NOTE: The splitter must always be correctly aligned so that the cut workpiece will pass on either side without binding or twisting to the side,

[,l'kWARNING I

Improper splitter alignment can cause "kickback" and serious injury,

Anti-kickback pawl

8Fig. M

INSTALLING TABLE SIDE EXTENSIONS (FIG. N)

1.Identify the right hand table extension.

NOTES:

For illustration purposes the view in Fig. N looks "through" the saw table to the under side of the table.

The right hand table extension is the one with the measuring scale (1) visible from the front of the saw when it is installed to the right hand side of the saw table (Fig. N).

2.Unlock both front and rear cam locking levers (2) on the right hand side of the saw base.

3.Insert the table extension mounting tubes (3) into the two matching holes in the cam lever assemblies.

NOTE: Make sure the front mounting tube has the measuring scale visible from the front of the

saw.

4.Slide the table extension toward the table until it rests against the saw table.

5.Place the location seat on the rear side extension tube.

6.Lock both cam locking levers.

Fig. N

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operators Manual Full ONE Year Warranty MotorSAW 5000Sawing Operations IA Warningi AmputationsAny extension cord must be Grounded for safe operation Minimum Gauge for Extension CordsAWG type / 120 Volt only Event of a Malfunction orIk Warningi Unpacking Your Table SAW PqrstvwExtension wing Page SAW Mounted to Work Surface FIG. C Blade Raising Handwheel FIG. E, FBlade Tilting Handwheel FIG. G, F Installing and Changing the Blade FIG. H, I, J Iz,WARNINGlBlade Guard Assembly FIG. K, L, M Installing Table Side Extensions FIG. NInstalling the Table Side EXTENSIONS- contd FIG. O Installing Rear Table Extension FIG. PAdjusting Rear Table Extension RIP Fence Adjustment FIG. QRIP Fence Indicator Adjustment FIG. Q Adjusting the 90 and 45 Positive Stops FIG.Q-I, Q-2,Q-3Stop Blade Tilting PointerIwarning Blade Parallel to the Miter Gauge Groove FIG. R,SON/OFF Switch FIG. U Raise the Blade FIG. TTilting the Blade FIG. T Overload Protection FIG. UCutting Operations Ripping FIG. WBevel Ripping Ripping Small PiecesCrosscutting FIG. Y Bevel Crosscutting FIG. ZUsing Wood Facing on the RIP Fence FIG. CC Mitering FIG. BBAuxiliary Fence FIG. CC-1 Making the baseFig. EE LubricationMakingany adjustments Symptom Possible Causes Corrective ActionAlways order by Model Number and I.D. number Schematic a QtyCO CO Schematic OT04 Table SAW Page Part list for Motor 113 Cut off here to Push 1/2 wood MY-HOME

137.248830 specifications

The Craftsman 137.248830 is a versatile and powerful table saw that has garnered attention among DIY enthusiasts and professional woodworkers alike. With its robust construction and user-friendly features, it stands out as a reliable choice for tackling a variety of woodworking projects.

One of the main attributes of the Craftsman 137.248830 is its precision. It comes equipped with a 10-inch blade that offers excellent cutting capabilities for a wide range of materials, including hardwood, plywood, and softwood. The saw utilizes a direct drive motor that delivers a powerful 15-amp output, ensuring consistent and efficient cutting performance.

Safety is a priority in this model, featuring an integrated blade guard system that protects users during operation. The saw also includes a riving knife, which helps prevent kickback by keeping the material aligned with the blade, enhancing overall safety while making cuts. Additionally, the push stick and safety switch are designed to further minimize risk, making it suitable for users of various skill levels.

Another prominent feature is its adjustable dual-sided fence system, which provides accurate and secure measurements for precise cuts. The fence can be easily adjusted, making it ideal for rip cuts as well as crosscuts. Furthermore, the measuring scale is clear and easy to read, allowing woodworkers to set up their projects quickly.

Portability is another characteristic that stands out. The Craftsman 137.248830 is designed with a foldable stand, making it easy to transport to job sites or store when not in use. Despite its sturdy construction, the saw remains lightweight enough for easy maneuverability.

Moreover, the onboard storage provides convenient access to all necessary tools, such as blades and wrenches, keeping everything organized . The dust port is also a noteworthy feature; it helps maintain a clean workspace by connecting to a dust extractor, which is essential for creating a safe working environment.

In summary, the Craftsman 137.248830 table saw combines power, precision, and safety features, making it a fantastic addition to any woodworking shop. Its reliable performance, user-friendly design, and portable nature cater to both amateur and professional woodworkers seeking quality in their tools.
Top Page Image Contents