Craftsman 137.248830 operating instructions Sawing Operations

Page 3

I_ WARNING]

Before using your table saw, it is critical that you read and understand these safety rules. Failure to follow these rules could result in serious injury or damage to the table saw.

Good safety practices are a combination of common sense, staying alert and understanding how to use your power tool. To avoid mistakes that could cause serious injury, do not plug in your power tool until you have read and understood the following safety rules:

1.READ and become familiar with this entire Operator's Manual. LEARN the tool'sapplications, limitations and possible hazards.

accessories. The use of improper accessories may cause injury to you or damage to the tool.

15.REMOVE ADJUSTING KEYS AND WRENCHES. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning ON.

16.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN THE POWER "OFF". Do not leave the tool before it comes to a complete stop.

2.[A WARNING I

Look for this symbol that identifies important safety precautions. It means CAUTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

3.NEVER OPERATE THIS MACHINE WITHOUT THE SAFETY GUARD IN PLACE FOR ALL THROUGH

SAWING OPERATIONS.

4.DO NOT USE IN A DANGEROUS ENVIRONMENT such as damp or wet locations or exposure to rain. Keep work area well lighted.

5.DO NOT use power tools in the presence of flammable liquids or gases.

6.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

7.KEEP CHILDREN AWAY. All visitors should be kept at a safe distance from the work area.

8.DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for which it was designed.

9.USE THE RIGHT TOOL. Don'tforce the tool or attachment to do a job for which it is not designed.

10.WEAR PROPER APPAREL. DO NOT wear loose

clothing, gloves, neckties, rings, bracelets or other jewelry that may get caught in moving parts. Non- slip footwear is recommended. Wear protective hair covering to contain long hair.

11.WEAR A FACE MASK OR DUST MASK. Sawing, cutting and sanding operations produce dust.

12.DISCONNECT TOOLS before servicing and when changing accessories such as blades, cutters, etc.

13.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure the switch is in the OFF position before plugging into the power supply.

14.USE ONLY RECOMMENDED ACCESSORIES. Consult the Operator's Manual for recommended

17.NEVER STAND ON THE TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

18.DO NOT OVERREACH. Keep proper footing and balance at all times.

19.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for most efficient and safest performance. Follow instructions for lubricating and changing accessories.

20.CHECK FOR DAMAGED OR LOOSE PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to ensure it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, loose mounting and any other conditions that may affect its safe operation. A guard or other part that is loose or damaged should be properly adjusted repaired or replaced.

21.MAKE WORKSHOP CHILD PROOF with padlocks, master switches or by removing starter keys.

22.DO NOT operate the tool if you are under the influence of any drugs, alcohol or medication that could impair your ability to use the tool safely.

23.ALWAYS WEAR EYE PROTECTION. Any power tool can throw foreign objects into your eyes that could cause permanent eye damage. ALWAYS wear safety goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday glasses have only impact resistant lenses. They ARE NOT safety glasses.

NOTE: Glasses or goggles not in compliance with

ANSI Z87.1 could cause serious injury when they break.

24.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operators Manual 5000 Full ONE Year WarrantyMotor SAWSawing Operations Amputations IA WarningiEvent of a Malfunction or Any extension cord must be Grounded for safe operationMinimum Gauge for Extension Cords AWG type / 120 Volt onlyIk Warningi Pqrstvw Unpacking Your Table SAWExtension wing Page SAW Mounted to Work Surface FIG. C Blade Raising Handwheel FIG. E, FBlade Tilting Handwheel FIG. G, F Iz,WARNINGl Installing and Changing the Blade FIG. H, I, JInstalling Table Side Extensions FIG. N Blade Guard Assembly FIG. K, L, MRIP Fence Adjustment FIG. Q Installing the Table Side EXTENSIONS- contd FIG. OInstalling Rear Table Extension FIG. P Adjusting Rear Table ExtensionBlade Tilting Pointer RIP Fence Indicator Adjustment FIG. QAdjusting the 90 and 45 Positive Stops FIG.Q-I, Q-2,Q-3 StopBlade Parallel to the Miter Gauge Groove FIG. R,S IwarningOverload Protection FIG. U ON/OFF Switch FIG. URaise the Blade FIG. T Tilting the Blade FIG. TRipping FIG. W Cutting OperationsBevel Crosscutting FIG. Z Bevel RippingRipping Small Pieces Crosscutting FIG. YMaking the base Using Wood Facing on the RIP Fence FIG. CCMitering FIG. BB Auxiliary Fence FIG. CC-1Lubrication Fig. EESymptom Possible Causes Corrective Action Makingany adjustmentsQty Always order by Model Number and I.D. number Schematic aCO CO Schematic OT04 Table SAW Page Part list for Motor 113 Cut off here to Push 1/2 wood MY-HOME

137.248830 specifications

The Craftsman 137.248830 is a versatile and powerful table saw that has garnered attention among DIY enthusiasts and professional woodworkers alike. With its robust construction and user-friendly features, it stands out as a reliable choice for tackling a variety of woodworking projects.

One of the main attributes of the Craftsman 137.248830 is its precision. It comes equipped with a 10-inch blade that offers excellent cutting capabilities for a wide range of materials, including hardwood, plywood, and softwood. The saw utilizes a direct drive motor that delivers a powerful 15-amp output, ensuring consistent and efficient cutting performance.

Safety is a priority in this model, featuring an integrated blade guard system that protects users during operation. The saw also includes a riving knife, which helps prevent kickback by keeping the material aligned with the blade, enhancing overall safety while making cuts. Additionally, the push stick and safety switch are designed to further minimize risk, making it suitable for users of various skill levels.

Another prominent feature is its adjustable dual-sided fence system, which provides accurate and secure measurements for precise cuts. The fence can be easily adjusted, making it ideal for rip cuts as well as crosscuts. Furthermore, the measuring scale is clear and easy to read, allowing woodworkers to set up their projects quickly.

Portability is another characteristic that stands out. The Craftsman 137.248830 is designed with a foldable stand, making it easy to transport to job sites or store when not in use. Despite its sturdy construction, the saw remains lightweight enough for easy maneuverability.

Moreover, the onboard storage provides convenient access to all necessary tools, such as blades and wrenches, keeping everything organized . The dust port is also a noteworthy feature; it helps maintain a clean workspace by connecting to a dust extractor, which is essential for creating a safe working environment.

In summary, the Craftsman 137.248830 table saw combines power, precision, and safety features, making it a fantastic addition to any woodworking shop. Its reliable performance, user-friendly design, and portable nature cater to both amateur and professional woodworkers seeking quality in their tools.
Top Page Image Contents