3Com 3013 (3C13613) manual Configuring the Router, Press Enter. The following information displays

Page 41

Software Maintenance

41

7Depending on your TFTP server interface, click on the appropriate icon or button, to set the path for the application on your system.

Configuring the Router

1Enter the TFTP configuration status.

2Boot the router and press N immediately when Booting displays on the screen. The following information displays on the terminal interface:

(M)odify any of router configuration or (C)ontinue? [M]

3Press Enter. The following information displays:

For each of the following questions, you can press <Return> to select the value shown in braces, or you can Enter a new value.

NETWORK INTERFACE PARAMETERS:

Do you want a LAN interface? [N] y

This board's LAN IP address? [169.254.10.10]10.110.10.10 Subnet mask for LAN (0 for none)? [255.255.0.0]

TFTP SERVER PARAMETERS:

Configure the TFTP Server parameters, including IP address of the Ethernet interface on the PC, file name of the application program, CPU delay time and so on.

IP address of the TFTP server? [169.254.75.166]10.110.10.13

What is the name of the file to be loaded and started? [m8241ram.arj] How long (in seconds) should CPU delay before starting up? [5]

4Configure the network interface parameters for the router, including the interface to be used, its IP address, and subnet mask.

As you configure these parameters, set the values so that:

■The IP address of the TFTP server is the IP address of the PC connected to the Ethernet port on the router.

■The IP address and subnet mask are the same as the IP address and subnet mask of the LAN0 port.

■The IP addresses of the PC network interface and the LAN0 port of the router reside on the same segment.

After you enter the last parameter, the following information displays and you can verify that the parameters are set correctly.

----------------------------------------------------------------

NETWORK INTERFACE PARAMETERS:

IP address on LAN is 10.110.10.10

LAN interface's subnet mask is 0xffff0000

HARDWARE PARAMETERS:

Processor type is MPC8241

Internal Clock Rate 200 Mhz

External Clock Rate 100 Mhz

Serial channels will use a baud rate of 9600

TFTP SERVER PARAMETERS:

IP address of the TFTP host is 10.110.10.13

The file to download and start is m8241ram.arj

After board is reset, start-up code will wait 5 seconds

---------------------------------------------------------------

(M)odify any of this or (C)ontinue? [M]C

5Enter C to confirm this configuration or M to modify any of the parameter settings.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Router 3000 Family Installation Guide Campus Drive 3Com CorporationMarlborough, MA 01752-3064Contents T1 Cable Console Cable AUX Cable Ethernet CableConventions About this GuideList conventions that are used throughout this guide Text ConventionsExamples Router Introducing the Router FamilyRouter 3012 LEDs System Specifications for the RouterLists attributes of the console port Console PortAUX Port Lists attributes of the AUX portEthernet Port Router 3013Lists attributes of the Ethernet port Synchronous/Asynchronous Serial PortRouter 3013 Description Router 3015 Description System Specifications for the Router 3013 and RouterSerial Router 3013 and Router 3015 LEDsEIA/TIA-23 Isdn S/T and Isdn U Ports Router 3016Lists attributes of the Isdn S/T and Isdn U ports Attributes of Isdn S/T and U PortsRouter 3016 Description Router 3018 Description System Specifications for the Router 3016 and RouterT1-ACT/E1-ACT Router 3016 LEDsLists attributes of the CT1/PRI and and E1/CE1/PRI ports CT1/PRI and E1/CE1/PRI PortsAttributes of the Ethernet Port Attributes of the CT1/PRI PortIsdn PRI Installing the Router Dust Temperature and HumidityGases Static ElectricityLightning Damage Electromagnetic DischargeBottom of the Router Connecting Installing the RouterWire On a WorkbenchTo the Ethernet To the ConsoleTerminal Connecting the Router to the WAN Installing the Router Verifying InstallationInstalling the Router Connecting the Router Booting and Configuring RouterSetting To a Local ConsoleConnection Description Dialog Box Parity None Stop bits Set the following parameters Bits per second 9600 Data bitsHyperTerminal Window Information displays on the terminal screen Powering on RouterStartup Process Configuration Online help, available by typing ? at any time Help for the Configuration Maintaining the Router Software MaintenanceXmodem Protocol DownloadingSend File Dialog Box Protocol Creating the Tftp Upgrade ConfigurationTerminal displays the following menu Applications with the copy from Tftp ProtocolPress Enter. The following information displays Configuring the RouterCreating a Local FTP Upload/Download Configuration Using FTPUpgrading the Application UploadingCreating a Remote FTP Upload/Download Configuration Add the user name and passwordFTP server ready on R3000 at User10.110.10.10none R3000 quit R3000 save Router Chassis HardwaretoolsCover Boot ROM LocationMaintaining the Router Nothing is Displayed on the Terminal after Power-On TroubleshootingPower LED is Off Illegible Characters Power-OnDisplay on Terminal afterConsole Cable Optional Cable SpecificationsAUX Cable Describes the console cable pinouts Console Cable PinoutsThat uses category-5 twisted pair cable, as shown in Figure Ethernet CableDescribes the AUX cable pinouts AUX Cable Pinouts Describes crossover network cable pinouts Serial Port CableStraight-through Network Cable Pinouts Crossover Network Cable PinoutsCable Pinouts DTE and DCE modeTypical DTE and DCE EIA/TIA-232 Maximum Transmission Baud Rate bps Distance m24 EIA/TIA-232 DCE illustrates the V.24 DCE cable Describes V.24 EIA/TIA-232 DTE cable pinoutsDescribes V.24 EIA/TIA-232 DCE cable pinouts 24 EIA/TIA-232 DTE Cable PinoutRTS/CTS CTS/RTS DTR/DSR LL/DCD DTE Cable Pinouts illustrates the V.35 DTE cable DB-50 Signal Signal DirectionDescribes V.35 DTE cable pinouts DCE Cable Pinouts illustrates the V.35 DCE cableDTE Cable Pinouts illustrates the X.21 DTE cable Signal DB-50 DirectionDescribes V.35 DCE cable pinouts 35 DCE cable Pinouts DCE Cable Pinouts illustrates the X.21 DCE cable Describes X.21 DTE cable pinoutsDescribes X.21 DCE cable pinouts 21 DTE Cable PinoutsEIA/TIA-449 DTE Cable illustrates the EIA/TIA-449 DTE cable DB50 Signal Signal Direction DB37Pinouts Describes EIA/TIA-449 DTE cable pinoutsEIA/TIA-449 DCE Cable illustrates the EIA/TIA-449 DCE cable EIA/TIA-449 DCE Cable AssemblyEIA-530 DTE Cable illustrates the EIA-530 DTE cable DB50 Signal Signal Direction DB25Describes EIA-530 DTE cable pinouts EIA-530 DTE Cable PinoutsIsdn BRI Cables T1 CableDescribes T1 cable pinouts Describes Isdn S/T port cable pinoutsIsdn U Port Cable Obtaining Support for Your Router Support and Repair Contact UsTelephone Technical US and Canada Telephone Technical Support and Repair Latin America Telephone Technical Support and RepairAppendix B Obtaining Support for Your Router
Top Page Image Contents