3Com 3018 (3C13618), 3015 (3C13615) Upgrading the Application, Uploading, Applications, Using FTP

Page 42

42CHAPTER 4: MAINTAINING THE ROUTER

Upgrading the Application

To upgrade the application:

1Boot the system normally.

2Press Ctrl+B within 5 seconds of the prompt that tells you to do so.

3Enter the BootROM password, if necessary.

4Enter 2 at the Boot menu, to select Download the Application Program Through TFTP. The following information displays:

Please start TFTP server then press ENTER key to get started

5If the PC running TFTP Server is ready, press Enter to begin loading the program.

Starting the TFTP download...

..................................................................

TFTP download completed...

read len=[03713478]

Writing program code to FLASH...

Please waiting,it needs a long time (about 5 min)

##############################

Write Flash Success.

Press ENTER key to reboot the system.

6After the loading, press Enter to reboot the router.

Uploading and

Uploading files involves transferring them from a PC running the FTP client to a

Downloading

router running the FTP server, through the router’s Ethernet port. This is called a

Applications and

put operation.

Configuration Files

Downloading files involves transferring them from the FTP server on the router,

Using FTP

 

through its Ethernet port, to the PC running the FTP client. This is called a get

 

operation. All FTP clients, including local and remote users, who are connected to

 

a router can upload and download if they pass user authentication.

Creating a Local FTP Upload/Download Configuration

To transfer files using FTP, you must create the appropriate configuration, as shown in Figure 23 and Figure 24, and described in the following procedures.

Figure 23 Creating a Local FTP Upload/Download Configuration

10.110.10.13

Ethernet port

10.110.10.10

 

CON AUX 100M ETH

 

 

DC12V

 

LAN

DC12V

CON AUX 100M ETH

 

Router 3012 (FTP Server)

 

 

LAN

 

Router 3012 (FTP Server)

PC (FTP Client)

To create a local FTP upload/download configuration:

1Connect the PC to any of the Ethernet ports on the router.

2Configure the IP address for the Ethernet port on the router. The default IP address is 10.110.10.10.

3Configure the IP address of the Ethernet port on the PC. The default IP address is 10.110.10.13.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Router 3000 Family Installation Guide Marlborough, MA 3Com CorporationCampus Drive 01752-3064Contents Console Cable AUX Cable Ethernet Cable T1 CableList conventions that are used throughout this guide About this GuideConventions Text ConventionsExamples Introducing the Router Family RouterSystem Specifications for the Router Router 3012 LEDsAUX Port Console PortLists attributes of the console port Lists attributes of the AUX portLists attributes of the Ethernet port Router 3013Ethernet Port Synchronous/Asynchronous Serial PortSystem Specifications for the Router 3013 and Router Router 3013 Description Router 3015 DescriptionRouter 3013 and Router 3015 LEDs SerialEIA/TIA-23 Lists attributes of the Isdn S/T and Isdn U ports Router 3016Isdn S/T and Isdn U Ports Attributes of Isdn S/T and U PortsSystem Specifications for the Router 3016 and Router Router 3016 Description Router 3018 DescriptionRouter 3016 LEDs T1-ACT/E1-ACTAttributes of the Ethernet Port CT1/PRI and E1/CE1/PRI PortsLists attributes of the CT1/PRI and and E1/CE1/PRI ports Attributes of the CT1/PRI PortIsdn PRI Installing the Router Gases Temperature and HumidityDust Static ElectricityElectromagnetic Discharge Lightning DamageBottom of the Router Wire Installing the RouterConnecting On a WorkbenchTo the Console TerminalTo the Ethernet Connecting the Router to the WAN Installing the Router Installation VerifyingInstalling the Router Setting Booting and Configuring RouterConnecting the Router To a Local ConsoleConnection Description Dialog Box Set the following parameters Bits per second 9600 Data bits Parity None Stop bitsHyperTerminal Window Powering on Router Startup ProcessInformation displays on the terminal screen Configuration Online help, available by typing ? at any time Help for the Configuration Software Maintenance Maintaining the RouterDownloading Xmodem ProtocolSend File Dialog Box Terminal displays the following menu Creating the Tftp Upgrade ConfigurationProtocol Applications with the copy from Tftp ProtocolConfiguring the Router Press Enter. The following information displaysUpgrading the Application Using FTPCreating a Local FTP Upload/Download Configuration UploadingAdd the user name and password Creating a Remote FTP Upload/Download ConfigurationFTP server ready on R3000 at User10.110.10.10none R3000 quit R3000 save Hardwaretools Router ChassisBoot ROM Location CoverMaintaining the Router Troubleshooting Power LED is OffNothing is Displayed on the Terminal after Power-On Display on Power-OnIllegible Characters Terminal afterAUX Cable Optional Cable SpecificationsConsole Cable Describes the console cable pinouts Console Cable PinoutsEthernet Cable Describes the AUX cable pinouts AUX Cable PinoutsThat uses category-5 twisted pair cable, as shown in Figure Straight-through Network Cable Pinouts Serial Port CableDescribes crossover network cable pinouts Crossover Network Cable PinoutsTypical DTE and DCE DTE and DCE modeCable Pinouts EIA/TIA-232 Maximum Transmission Baud Rate bps Distance mDescribes V.24 EIA/TIA-232 DCE cable pinouts Describes V.24 EIA/TIA-232 DTE cable pinouts24 EIA/TIA-232 DCE illustrates the V.24 DCE cable 24 EIA/TIA-232 DTE Cable PinoutRTS/CTS CTS/RTS DTR/DSR LL/DCD Describes V.35 DTE cable pinouts DB-50 Signal Signal DirectionDTE Cable Pinouts illustrates the V.35 DTE cable DCE Cable Pinouts illustrates the V.35 DCE cableSignal DB-50 Direction Describes V.35 DCE cable pinouts 35 DCE cable PinoutsDTE Cable Pinouts illustrates the X.21 DTE cable Describes X.21 DCE cable pinouts Describes X.21 DTE cable pinoutsDCE Cable Pinouts illustrates the X.21 DCE cable 21 DTE Cable PinoutsPinouts DB50 Signal Signal Direction DB37EIA/TIA-449 DTE Cable illustrates the EIA/TIA-449 DTE cable Describes EIA/TIA-449 DTE cable pinoutsEIA/TIA-449 DCE Cable Assembly EIA/TIA-449 DCE Cable illustrates the EIA/TIA-449 DCE cableDescribes EIA-530 DTE cable pinouts DB50 Signal Signal Direction DB25EIA-530 DTE Cable illustrates the EIA-530 DTE cable EIA-530 DTE Cable PinoutsDescribes T1 cable pinouts T1 CableIsdn BRI Cables Describes Isdn S/T port cable pinoutsIsdn U Port Cable Obtaining Support for Your Router Contact Us Telephone TechnicalSupport and Repair Latin America Telephone Technical Support and Repair US and Canada Telephone Technical Support and RepairAppendix B Obtaining Support for Your Router
Top Page Image Contents