Troubleshooting
|
| WHAT TO CHECK |
| WHAT TO DO |
TYPE OF PROBLEM | If check is OK, go to next check | When check is not OK, refer to this column | ||
|
|
|
|
|
Motor runs but pump does | 1. | Displacement pump pin (32) | 1. | Replace pump pin if missing. Be sure |
not stroke |
| damaged or missing; see pump |
| retainer spring (31) is fully in groove all |
|
| manual 310643 or 310894. |
| around connecting rod; see pump manual |
|
|
|
| 310643 or 310894. |
|
|
|
|
|
| 2. | Connecting rod assembly (43) | 2. | Replace connecting rod assembly; see |
|
| damaged; see pump manual |
| pump manual 310643 or 310894. |
|
| 310643 or 310894. |
|
|
|
|
|
|
|
| 3. | Gears or drive housing dam- | 3. | Inspect drive housing assembly and gears |
|
| aged, page 28. |
| for damage and replace if necessary; see |
|
|
|
| pump manual 310643 or 310894. |
|
|
|
|
|
Excessive paint leakage | 1. | Throat packing nut is loose | 1. | Remove throat packing nut spacer. |
into throat packing nut |
|
|
| Tighten throat packing nut just enough to |
|
|
|
| stop leakage. |
|
|
|
|
|
| 2. | Throat packings are worn or | 2. | Replace packings; see pump manual |
|
| damaged |
| 310643 or 310894. |
|
|
|
|
|
| 3. | Displacement rod is worn or | 3. | Replace rod; see pump manual 310643 or |
|
| damaged |
| 310894. |
|
|
|
|
|
Fluid is spitting from gun | 1. | Air in pump or hose | 1. | Check and tighten all fluid connections. |
|
|
|
| Cycle pump as slowly as possible during |
|
|
|
| priming. |
|
|
|
|
|
| 2. | Tip is partially clogged | 2. | Clear tip; see tip guard manual 309640. |
|
|
|
|
|
| 3. | Fluid supply is low or empty | 3. | Refill fluid supply. Prime pump; see pump |
|
|
|
| manual 310643 or 310894. Check fluid |
|
|
|
| supply often to prevent running pump dry. |
|
|
|
|
|
Pump is difficult to prime | 1. | Air in pump or hose | 1. | Check and tighten all fluid connections. |
|
|
|
| Cycle pump as slowly as possible during |
|
|
|
| priming. |
|
|
|
|
|
| 2. | Intake valve is leaking | 2. | Clean intake valve. Be sure ball seat is not |
|
|
|
| nicked or worn and that ball seats well. |
|
|
|
| Reassemble valve. |
|
|
|
|
|
| 3. | Pump packings are worn | 3. | Replace pump packings; see pump man- |
|
|
|
| ual 310643 or 310894. |
|
|
|
|
|
| 4. | Paint is too thick | 4. | Thin the paint according to supplier rec- |
|
|
|
| ommendations. |
|
|
|
|
|
No display, sprayer operates | 1. | Display is damaged or has bad | 1. | Check connections. Replace display. |
|
| connection |
|
|
|
|
|
|
|
12 | 3A0157B |