Graco 16H242, 262612, 16H241, 16H243, 16H245, 16F887 16H240, 16H829 Outlet Valve Repair, Removal

Page 25

Outlet Valve Repair

Outlet Valve Repair

Move sprayer to a non-hazardous area before servicing.

NOTE: Before doing any repair to pump, perform Flushing Sprayer procedure, page 16.

Removal

1.Engage trigger lock and pull prime/pressure relief valve UP to release pressure.

ti16699a

ti16700a

2. Remove battery.

ti16745a

3. Remove pump outlet cap.

ti16749a

4.Use tool (supplied) to loosen and remove outlet valve fitting. Make sure old o-ring, seat, outlet valve, and spring are out of pump outlet cavity.

ti16748a

Installation

1.Screw outlet valve fitting into threads. Use tool (supplied) and tighten to 8 ft-lb.

ti16750a

2. Press pump outlet cap into place.

ti16751a

Outlet cap prevents the discharge of static electricity. Always replace outlet cap after installing outlet valve.

3A1698F

25

Image 25
Contents Fine Finish Hand-Held Paint Sprayer 3A1698F Table of Contents Grounding Wire Repair Fire and Explosion Hazard Equipment Misuse Hazard Pressurized Aluminum Parts Hazard Component Identification Charger Status Indicator Lights Charging the BatterySprayer Status Indicator Prime/Pressure Relief Valve Position Trigger Lock Pressure Relief ProcedureSpray Tip Position Low Speed High Speed Setting Hi/Lo Switch Adjusting Pressure Motor SpeedFlexible Suction Tube SetupSpraying Ceilings, Walls and Crown Molding Spraying Floors and Base BoardsSprayer Setup Starting a New Job Or Refilling the Cup Reversible Tip Selection ChartGetting Started with Basic Techniques Install Tip/Guard Assembly if not installedTriggering Sprayer Aiming SprayerUnclogging Spray Tip/Guard Assembly Flushing Sprayer Shutdown and CleaningTi15529ati16727a Storage Cleaning Sprayer ExteriorFine Finish Tip Wear Replacement Parts and Kits Parts List Description 62-66 Model 16H240 16U241 Alternate Priming Method Installation Inlet Valve Removal/ServiceRemoval Outlet Valve RepairProblem Cause Solution TroubleshootingSee Reversible Tip Selection Chart Spray Pattern Diagnostics Problem Cause SolutionSpray pattern spits at Sprayer Technical DataPreferred Material Settings Log 3A1698F Graco Information Graco Standard Warranty