Graco 16H829, 262612, 16H241, 16H243, 16H245, 16H242, 16F887 16H240 Pressurized Aluminum Parts Hazard

Page 6

Warnings

WARNING

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or property damage.

•Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents.

•Many other fluids may contain chemicals that can react with aluminum. Contact your material supplier for compatibility.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDS’s to know the specific hazards of the fluids you are using.

•Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This equipment includes but is not limited to:

•Protective eyewear, and hearing protection.

•Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

6

3A1698F

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Fine Finish Hand-Held Paint Sprayer 3A1698F Table of Contents Grounding Wire Repair Fire and Explosion Hazard Equipment Misuse Hazard Pressurized Aluminum Parts Hazard Component Identification Charging the Battery Charger Status Indicator LightsSprayer Status Indicator Trigger Lock Pressure Relief Procedure Prime/Pressure Relief Valve PositionSpray Tip Position Setting Hi/Lo Switch Adjusting Pressure Motor Speed Low Speed High SpeedSpraying Ceilings, Walls and Crown Molding SetupFlexible Suction Tube Spraying Floors and Base BoardsSprayer Setup Reversible Tip Selection Chart Starting a New Job Or Refilling the CupTriggering Sprayer Install Tip/Guard Assembly if not installedGetting Started with Basic Techniques Aiming SprayerUnclogging Spray Tip/Guard Assembly Shutdown and Cleaning Flushing SprayerTi15529ati16727a Cleaning Sprayer Exterior StorageFine Finish Tip Wear Replacement Parts and Kits Parts List Description 62-66 Model 16H240 16U241 Alternate Priming Method Inlet Valve Removal/Service InstallationOutlet Valve Repair RemovalTroubleshooting Problem Cause SolutionSpray Pattern Diagnostics Problem Cause Solution See Reversible Tip Selection ChartSpray pattern spits at Technical Data SprayerPreferred Material Settings Log 3A1698F Graco Standard Warranty Graco Information
Top Page Image Contents