Common Procedures
Common Procedures
Trigger Lock | Pressure Relief Procedure | |
|
|
|
|
|
|
Always engage the trigger lock when you stop spraying to prevent the sprayer from being triggered accidentally by hand, or if dropped or bumped.
Do not operate or spray near children. Do not aim the sprayer at, or spray any person or animal. Keep hands and other body parts away from the front of the sprayer. For example, do not try to stop the paint flow with any part of the body.
This sprayer builds up an internal pressure of 1,700 psi during use. Follow this Pressure Relief Procedure whenever you stop spraying and before cleaning, checking, servicing, or transporting equipment to prevent serious injury.
4. Engage trigger lock.
Trigger Locked
ti16699a
ti16699a
ti16698a
Trigger Unlocked (red ring is visible)
Prime/Pressure Relief Valve Position
5.Put prime/pressure relief valve UP to release pres- sure.
ti16700a
Spray Tip Position
Always perform Pressure Relief Procedure before adjusting spray tip position.
ti16701a ti16700a
UP position | DOWN position |
| |
(For priming and releasing | (Ready to spray) |
| |
pump pressure) | ti16992a | ti14991a | |
ti14985a | |||
| ti14991a |
Tip Forward | Tip Reversed | ti15510a |
(SPRAY position) | (UNCLOG position) |
|
3A1698F | 9 |