Thank you for choosing HERO HVLP
To ensure the proper use and maintenance of your HERO sprayer, please carefully read the information contained in this manual before using your system. Should you require any further information, please contact your nearest HERO distributor, or HERO directly for assistance - we will be pleased to assist you.
IMPORTANT: READ BEFORE USING
SAFETY PRECAUTIONS
??CAUTION: Arcing parts. Keep the turbine at least 20 feet away from explosive vapors to avoid risk of fire or explosion.
??Never spray flammable materials near any source of open flame or spark.
??Always spray in a properly ventilated area.
??Never point the spray gun at anyone.
??Always wear a spray mask and protective eyewear when spraying toxic substances.
IMPORTANT OPERATING TIPS
??For simple Operating Instructions and Painting Tips, please refer to the laminated card supplied with your system, attached to the handle of the turbine.
??Most sprayable coatings must be diluted to be sprayed. Always follow the paint or coating manufacturer’s instructions regarding thinning solvents and dilution ratios when preparing the coating to be sprayed.
??Select the appropriate Needle, Fluid Tip and Air Cap based on the coating being sprayed, the film thickness required, and the application speed and finish required.
??For optimum results, always test spraying distance, pattern size, coating thickness, Needle/Fluid Tip/ Air Cap combination and finish, on a sample of the surface to be coated.
??When using a Cup Gun, do not turn the gun
??Make sure you clean your spray gun after each use as outlined in this manual. Proper cleaning is essential to ensure the smooth operation of your system.
WARRANTY
??Where applicable, please complete the enclosed warranty information card and return it to HERO Industries
HERO Operator’s Manual – Page 1 of 23