I.C.T.C. Holdings Corporation 3000 owner manual Poor Good Tailing Good Pattern Fog, Over Spray

Page 11

FIG. 1

AIRLESS SPRAY PAINTING

SUGGESTIONS AND TECHNIQUE

Poor	Good	Tailing	Good Pattern	Fog, Over Spray

FIG. 2

FIG. 2

FIG. 3

FIG. 4

FIG. 5

H.E.R.O. INDUSTRIES

11

Model 3000 Owner’s Manual

Image 11

Contents Airless Spray Equipment R.O. Warranty Table of Contents Important Safety Precautions Always AlwaysRead this Manual Thoroughly R.O. Airless Spray PaintingOperating Instructions Setting UP to Spray Special Storage Instructions Flushing the Unit AT Shutdown Or Color ChangeSpecial Notes and Instructions For Excellent RESULTS, Read and Practice These Techniques Airless Spray Painting Suggestions and TechniquePoor Good Tailing Good Pattern Fog, Over Spray FAN Width Spray TIP ReplacementTIP Size For Application Orifice SizeCoatings Filter Orifice Viscosity Mesh Size GPMTroubleshooting Hydraulic Outgo Valve REF# 73, 4-27C Paint Intake Valve Assembly REF#Hydraulic Intake Valve REF# 62 Prime Valve REF# 34, 4-606 NEW Paint Outgo Valve REF# 22, 4-11APressure Test Situation No PRESSURE, Blue Hydraulic Fluid in Paint Puddle of OIL Appearing Under Sprayer During Operation Sprayer does not Prime with Paint Spray Material Leaks AT Prime Valve Stem Tools or Supplies Required Replacement of Intake SeatSpecial Notes Outgo ValveRepair of Bleed Valve Bleed Valve Repair Kit InstallationDiaphragm Replacement Pressure Control Valve Piston Repairs Piston Repairs Accessories KIT Parts ListDescription QTY AssyJAM NUT, 3/8 NC Diaphragm AssemblyHydraulic Parts Drive Parts Model Parts Schematic Model Schematic R.O. Industries 2719 Lake City WAY BURNABY, B.C Canada