I.C.T.C. Holdings Corporation 3000 owner manual R.O. Warranty

Page 2

H.E.R.O. WARRANTY

H.E.R.O. INDUSTRIES , guarantees this airless pump to be free of defects in materials and workmanship to the original owner, for a period of one full year from the date of purchase.

The warranty entitles the owner to parts replacement at no charge. The parts replacement warranty is valid for any necessary replacement, whither caused by material or workmanship defect or simple wear. H.E.R.O. Industries offers no warranty on the intake ball, outgo ball, drive belt, hoses, gun or accessories, plastic, rubber, other soft goods or motor used in or supplied with the H.E.R.O. sprayer.

Motor, accessories, etc., which are supplied by other manufacturers and are attached to or supplied with the H.E.R.O. airless pump, are warranted only to the extent that these parts are warranted by their respective manufacturers. Warranty claims must be made directly to such manufacturers or their local authorized service depots.

The warranty is only applicable to the original purchaser and the equipment has been properly used, operated and maintained in accordance with all instructions, precautions and warnings contained in this manual. For the purpose of this warranty, damage resulting from accident, abuse, improper cleaning or operation, fire, flood, or Act of God, is not covered.

H.E.R.O.’s liability is limited to replacing parts found to be defective or worn and does not include; transportation costs, damage or other expenses of any kind incurred in connection with the purchase and use of this sprayer.

Repairs claimed under warranty must be performed at an authorized H. E.R.O. Service Center, using only genuine H.E.R.O. parts. Parts necessary under warranty claim will be supplied by your local H.E.R.O. Service Center. DO NOT return worn parts to factory without authorization.

To qualify for the warranty, the warranty card (attached to this page) supplied with this H.E.R.O. airless pump, must be completed with equipment serial number and signed by the purchaser, and postmarked within ten (10) days of purchase.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H.E.R.O. INDUSTRIES

2

 

 

 

 

 

Model 3000 Owner’s Manual

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Airless Spray Equipment R.O. Warranty Table of Contents Important Safety Precautions Always AlwaysRead this Manual Thoroughly R.O. Airless Spray PaintingOperating Instructions Setting UP to Spray Flushing the Unit AT Shutdown Or Color Change Special Storage InstructionsSpecial Notes and Instructions Airless Spray Painting Suggestions and Technique For Excellent RESULTS, Read and Practice These TechniquesPoor Good Tailing Good Pattern Fog, Over Spray Orifice Size Spray TIP ReplacementTIP Size For Application FAN WidthGPM Coatings Filter Orifice Viscosity Mesh SizeTroubleshooting Hydraulic Outgo Valve REF# 73, 4-27C Paint Intake Valve Assembly REF#Hydraulic Intake Valve REF# 62 Paint Outgo Valve REF# 22, 4-11A Prime Valve REF# 34, 4-606 NEWPressure Test Situation No PRESSURE, Blue Hydraulic Fluid in Paint Puddle of OIL Appearing Under Sprayer During Operation Sprayer does not Prime with Paint Spray Material Leaks AT Prime Valve Stem Replacement of Intake Seat Tools or Supplies RequiredOutgo Valve Special NotesBleed Valve Repair Kit Installation Repair of Bleed ValveDiaphragm Replacement Pressure Control Valve Piston Repairs Piston Repairs Accessories Assy Parts ListDescription QTY KITDiaphragm Assembly JAM NUT, 3/8 NCHydraulic Parts Drive Parts Model Parts Schematic Model Schematic R.O. Industries 2719 Lake City WAY BURNABY, B.C Canada
Top Page Image Contents