I.C.T.C. Holdings Corporation 3000 R.O. Industries 2719 Lake City WAY BURNABY, B.C Canada

Page 38

Manufactured by:

H.E.R.O. INDUSTRIES 2719 LAKE CITY WAY BURNABY, B.C.

CANADA

Phone: 604-420-6543

800-494-4376

Fax: 604-420-8725

Purchased From

__________________________

__________________________

__________________________

__________________________

Model: __________________

Serial #: _________________

Date of Purchase:

INDUSTRIES

38

Model 3000 Owner’s Manual

Image 38

Contents Airless Spray Equipment R.O. Warranty Table of Contents Important Safety Precautions Always AlwaysRead this Manual Thoroughly R.O. Airless Spray PaintingOperating Instructions Setting UP to Spray Flushing the Unit AT Shutdown Or Color Change Special Storage InstructionsSpecial Notes and Instructions Airless Spray Painting Suggestions and Technique For Excellent RESULTS, Read and Practice These TechniquesPoor Good Tailing Good Pattern Fog, Over Spray Orifice Size Spray TIP ReplacementTIP Size For Application FAN WidthGPM Coatings Filter Orifice Viscosity Mesh SizeTroubleshooting Hydraulic Outgo Valve REF# 73, 4-27C Paint Intake Valve Assembly REF#Hydraulic Intake Valve REF# 62 Paint Outgo Valve REF# 22, 4-11A Prime Valve REF# 34, 4-606 NEWPressure Test Situation No PRESSURE, Blue Hydraulic Fluid in Paint Puddle of OIL Appearing Under Sprayer During Operation Sprayer does not Prime with Paint Spray Material Leaks AT Prime Valve Stem Replacement of Intake Seat Tools or Supplies RequiredOutgo Valve Special NotesBleed Valve Repair Kit Installation Repair of Bleed ValveDiaphragm Replacement Pressure Control Valve Piston Repairs Piston Repairs Accessories Assy Parts ListDescription QTY KITDiaphragm Assembly JAM NUT, 3/8 NCHydraulic Parts Drive Parts Model Parts Schematic Model Schematic R.O. Industries 2719 Lake City WAY BURNABY, B.C Canada