Alcatel Carrier Internetworking Solutions ACT 250 user manual Lev, Lng, Nsp, Syntax Result

Commissioning

Detailed description of RS commands

January 2001

LEV

Syntax

Result

LNG

Syntax

Result

See also: SHT

NSP

Syntax

Result

See also: RPM, SBY

Returns the state of the parameters defined by SET

#adrLEV<CR>[<LF>]

#adr,nnnnn,sssss,aaaa,hhhhh or

#adr,nnnnn rpm,sssss rpm,aaaa mA,hhhhh hours

Returns the current values:

nnnnn: speed set point sssss : stand-by speed aaaa : max. current set point

hhhhh : alert level for pump bearing maintenance

Returns the strings sent with the identification sub-strings

#adrLNG<CR>[<LF>]

#adr,ok

AVT>

Allows the parameters returned by the DLR, LEV and SPD commands to be identified with sub-strings. DLR, LEV, SPD.

Also generates the “AVT>” prompt each time a <CR> character is received.

Switches the speed set point to the nominal speed value

#adrNSP<CR>[<LF>]

#adr,ok

The speed set point for the pump is set to its nominal value. This configuration is automatically saved in user memory.

This mode of operation prevents the use of the “RPM” command.

Alcatel Vacuum Technology France - ACT 250 addendum 19