Presentation
The ACT 250 controller
Dear Customer,
You have just bought an ACT 250 controller. In order to ensure the best possible performance of the equipment and your complete satisfaction in using it, we advise you to read this addendum carefully before attempting to service or use your controller.
Insertable “box” version | Integrable “OEM” version |
Part No. 108320 | Part No. 108151 |
ACT 250 controller This controller drives ATP 150 or ATP 400 pumps, providing their power supply and enabling remote control.
The ACT 250 controller is available as:
■an insertable “box” version with case,
■an integrable “OEM” version without case. This version can replace the “box” version when integrating the pump in a complex installation or device.
Main characteristics ■ Dry contact signal outputs
■
■RS 232 / 485 serial links
■Operate at all voltages from 85 to 265 V, 50/60 Hz
January 2001
The ACT 250 controller is a new product, not described in Edition 09 of the ATP Series
Pump User Manual.
This addendum provides the additional information needed to use the controller.
Alcatel Vacuum Technology France - ACT 250 addendum | 3 |