Alcatel Carrier Internetworking Solutions ACT 250 Set, Sht, Spd, Syntax Result See also LEV

Page 23

Commissioning

Detailed description of RS commands

SET

Syntax

Result

See also: LEV

SHT

Syntax

Result

See also: LNG

SPD

Syntax

Result See also: LNG, SHT

Deﬁnes the internal operating parameters

#adrSET1 hhhhh<CR>[<LF>] : maintenance time limit 000<hhhhh<65535

#adr,ok or #adr,ErrX

Return the DataLogger string without the identiﬁcation sub-string

#adrSHT<CR>[<LF>]

#adr,ok

The strings sent following DLR, LEV and SPD commands are sent without parameter identiﬁcation sub-strings (e.g. without units).

Returns the current speed

#adrSPD<CR>[<LF>]

#adr,nnnnn #adr,nnnnn rpm

January 2001

22	Alcatel Vacuum Technology France - ACT 250 addendum

Image 23

Contents ACT Contents Use Syntax conventions applicable to all commandsACT 250 controller PresentationEurope 108936 108948 Accessories108935 ACT 250 box controller control modes Local control modeRemote control There are three possible remote control modesACT 250 OEM controller control modes ACT 250 box dimensions in mm ACT 250 controller technical characteristicsACT 250 OEM dimensions in mm Commissioning Safety instructionsACT 250 controller electrical connections Principle of voltage- controlled optocoupled inputs ACT 250 remote connector characteristicsVoltage control mode Ext. safety Select ModeSignalling on output contacts Use in remote control mode ACT 250 remote connector wiringBaud rate 9600 4800 Wiring the RS 232 or RS 485 serial linkRS 232 / 485 serial link ParityResult #aaa,ok or Err2 Detailed description of RS commandsSyntax conventions applicable to all commands Result #adr,ok,S For Ckson #adrCKSOFFCRLFResult #adr,ok or Err2 Enables DataLogger operation RS232 onlySoftware version IDN#adrECHOFFCRLF Identiﬁes the device which is communicating, and itsSyntax Result LEVLNG NSPSyntax Result See also SEL OPTRPM SAVA reply Syntax #adrSEPnnnCRLF Result #adr,ok or #adr,ErrX If errorSEL Deﬁnes the character which separates the parametersSyntax Result See also LEV SETSHT SPDDeﬁnes the turbomolecular pump operating state TMPControlling the pump from the ACT 250 controller UseStarting the pump with the Start switch Indication of rotation during operation controller on Precautions Local mode operationController functions Use Japan FranceGermany Italy