Grizzly G9969 owner manual Headstock, To install the headstock

3.Place the rack inside the headstock bracket, engage it with the gear inside the headstock bracket, and with help of assistants, slide the rack and headstock bracket onto the column, as shown in Figure 8.

Figure 8. Mounting headstock bracket.

4.Re-install the cap and tighten the cap screw.

5.Install the lock handles as shown in Figure 9.

Lock

Handles

Figure 9. Headstock bracket lock handles.

6.Screw the crank handle into the crank handle arm.

7.Loosen the set screw located in the crank handle arm, and slide the crank handle arm onto the crank shaft. Tighten the set screw.

-16-

Headstock
Components and Hardware Needed:	Qty
Base/Column/Bracket Assembly	1
Headstock	1
To install the headstock:

1.With the help of an assistant, lift the head- stock and slide it onto the bracket column, as shown in Figure 10.

Figure 10. Mounting the headstock.

2.Align the headstock with the base and tighten the two set screws shown in Figure 11.

Set Screws

Figure 11. Headstock set screws.

G9969 Radial Drill Press