Carrier 50SX024-060, 50SS018-060 owner manual Dimensions Units 50SS048,060 Without Base Rail

REQUIRED CLEARANCES TO COMBUSTIBLE MATERIAL Ð in. (mm)
Unit Top	. . 14 (356)
Duct Side of Unit	. . . . 2 (51)
Side Opposite Ducts	. . 14 (356)
Bottom of Unit	. . . . . . 0
Vertical Discharge First 12 in. (305) of Supply Duct	. . . . 1 (25)
NECESSARY REQUIRED CLEARANCES Ð in. (mm)
Between Units, Control Box Side	. . 42 (1067)
Unit and Ungrounded Surfaces, Control Box Side	. . 36 (914)
Unit and Block or Concrete Walls and Other Grounded
Surfaces, Control Box Side	. . 42 (1067)
REQUIRED CLEARANCES FOR SERVICING Ð in. (mm)
Evaporator Coil Access Side	. . 30 (762)
Control Box Access Side	. . 30 (762)
(Except for Necessary Requirements)
Unit Top	. . 36 (914)
Side Opposite Ducts	. . 30 (762)

UNIT				CENTER OF GRAVITY (in./mm)
50SS			X			Y		Z
048			21.9/555		19.6/498			13.4/341
060			22.2/565		19.8/503			13.4/340
				LEGEND
CG	Ð	Center of Gravity			NEC	Ð	National Electrical Code
COND	Ð	Condenser			REQ'D	Ð	Required
MAT'L	Ð	Material

NOTES:

1.	Clearances must be maintained to prevent recirculation of air from outdoor-fan dis-
	charge.
2.	Dimensions in ( ) are in millimeters.

UNIT	ELECTRICAL		UNIT WT			CORNER WT (Lb/Kg)
50SS	CHARACTERISTICS	Lb		Kg	A	B	C	D
048	208/230-1-60, 208/230-3-60, 460-3-60	332		151	82/37	68/31	131/60	51/23
060	208/230-1-60, 208/230-3-60, 460-3-60	359		163	65/30	99/45	120/55	75/34

Fig. 4 Ð Dimensions; Units 50SS048,060 Without Base Rail

4