Operating Instructions

90520993 VPX1201 VPX Dril#E4FEB 7/11/07 9:48 AM Page 10

WARNING: Always use proper eye protection that conforms to ANSI Z87.1 (CAN/CSA Z94.3) while operating this power tool.

NOTE: Battery pack performance will decrease under heavy use conditions when temperature is below 32° F (0°C). As the battery cells heat up the performance will improve.

INSTALLING AND REMOVING THE BATTERY PACK (FIGURE D, E)

CAUTION: Make certain the lock-off button is engaged to prevent switch actuation before removing or installing battery.

Installing the battery pack:

Insert the metal terminal end of the battery pack into the product until you hear the lock snap into place and the VPXTM logo shows through the window as shown in figure D.

CAUTION: The battery can only be inserted in one direction. If the battery does not fit, remove and reverse the orientation. Do not force it.

Removing the battery pack:

Press the release button as shown in figure E and firmly pull the battery pack out of the handle. Insert the battery pack into the charger (figure B) as described in the charger section of this manual.

TRIGGER SWITCH & REVERSING BUTTON (FIGURE F)

•The drill is turned ON and OFF by pulling and releasing the trigger switch.

•A forward/reverse control button determines the direction of the tool and also serves as a lock off button.

•To select forward rotation, release the trigger switch and depress the forward/reverse control button to the left.

•To select reverse direction, depress the forward/reverse control button the opposite direction.

•The center position of the control button locks the tool in the off position. When changing the position of the control button, be sure the trigger is released.

TORQUE CONTROL (FIGURE G)

This tool is fitted with a 8 position collar to select the operating mode and to set the torque for tightening screws. Large screws and hard workpiece materials require a higher torque setting than small screws and soft workpiece materials.

•For drilling in wood, metal and plastics, set the collar to the drilling position symbol .

•For screwdriving, set the collar to the desired setting. If you do not yet know the appropriate setting, proceed as follows:

•Set the collar to the lowest torque setting.

•Tighten the first screw.

•If the clutch ratchets before the desired result is achieved, increase the collar setting and continue tightening the screw. Repeat until you reach the correct setting. Use this setting for the remaining screws.

HIGH/LOW SPEED SELECTOR (FIGURE H)

The dual range feature of your drill allows you to shift gears for greater versatility. To select low speed, high torque setting (position 1), turn tool off and permit to stop. Slide gear shifter button to the left.

To select the high speed, low torque setting (position 2), turn tool off and permit to stop. Slide gear shifter button to the right.

NOTE: Do not change gears when tool is running. If you are having trouble changing gears, make sure that the dual range gear button is either completely pushed to the right or left.

KEYLESS CHUCK (FIGURE I)

To insert a drill bit or other accessory:

1.Grasp the chuck and rotate it in the counterclockwise direction, as viewed from the chuck end.

VPX1201 specifications

The Black & Decker VPX1201 is a versatile and powerful vacuum cleaner designed for both home and office use. This innovative device combines robust suction capabilities with a lightweight and ergonomic design, making it ideal for efficient cleaning in various settings.

One of the standout features of the VPX1201 is its powerful motor, which offers impressive suction strength. This enables the vacuum to pick up dirt, debris, and pet hair from a range of surfaces, from carpets to hardwood floors. The device is equipped with a high-efficiency filter that traps fine dust particles, ensuring that the air remains clean and fresh during and after cleaning.

The VPX1201 also boasts a versatile design with multiple cleaning modes. With a simple switch, users can transition from vacuuming carpets to hard flooring, optimizing performance based on the cleaning surface. This adaptability makes it suitable for a wide range of cleaning tasks, whether for daily maintenance or deep cleaning sessions.

Portability is another significant characteristic of the Black & Decker VPX1201. It is designed to be lightweight and easy to maneuver, which is especially beneficial for reaching tight spaces and corners. The vacuum is equipped with a long power cord that allows users to cover larger areas without needing to switch outlets frequently.

Additionally, the vacuum features a bagless design, which simplifies maintenance and reduces costs associated with purchasing replacement bags. The easy-to-empty dust cup can be quickly removed and emptied, making cleanup a breeze. This user-friendly approach is complemented by a set of onboard tools that enhance the vacuum's versatility.

Among these tools is a crevice tool for tight spaces, a brush attachment for upholstery, and a dusting brush for delicate surfaces. These accessories make the Black & Decker VPX1201 a comprehensive cleaning solution for various needs.

Moreover, the vacuum's design is complemented by a modern aesthetic, ensuring that it not only performs well but also looks good in any environment. Its compact build allows for easy storage, making it an excellent addition to any cleaning arsenal.

In summary, the Black & Decker VPX1201 stands out for its powerful suction, versatile cleaning modes, lightweight design, and bagless convenience. With its array of onboard tools and modern aesthetic, it caters to diverse cleaning needs, making it a practical choice for users who demand efficiency and ease of use in their cleaning appliances.