Black & Decker VPX1201 Screw Driving, Drilling in Wood, Drilling in Metal, Maintenance

Page 11

90520993 VPX1201 VPX Dril#E4FEB 7/11/07 9:48 AM Page 11

2.Insert the bit or other accessory fully into the chuck, and tighten securely by rotating the chuck in the clockwise direction as viewed from the chuck end.

WARNING: Do not attempt to tighten drill bits (or any other accessory) by gripping the chuck and turning the tool on. Damage to the chuck and personal injury may occur when changing accessories.

SCREW DRIVING

For driving fasteners, the reversing button should be pushed to the left. Use reverse (button pushed to the right) for removing fasteners. When moving from forward to reverse, or vice versa, always release the trigger switch first.

DRILLING

•Use sharp drill bits only.

•Support and secure work properly, as instructed in the Safety Instructions.

•Use appropriate and required safety equipment, as instructed in the Safety Instructions.

•Secure and maintain work area, as instructed in the Safety Instructions.

•Run the drill very slowly, using light pressure, until the hole is started enough to keep the drill bit from slipping out of it.

•Apply pressure in a straight line with the bit. Use enough pressure to keep the bit biting but not so much as to stall the motor or deflect the bit.

•Hold the drill firmly with two hands to control its twisting action.

•Do not click the trigger of a stalled drill on and off in an attempt to start it. Damage to the drill can result.

•Minimize stalling on breakthrough by reducing pressure and slowly drilling through the last part of the hole.

•Keep the motor running while pulling the bit out of a drilled hole. This will help reduce jamming.

•Make sure switch turns drill on and off.

DRILLING IN WOOD

Holes in wood can be made with the same twist drill bits used for metal or with spade bits. These bits should be sharp and should be pulled out frequently when drilling to clear chips from the flutes.

DRILLING IN METAL

Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry. The cutting lubricants that work best are sulfurized cutting oil or lard oil.

DRILLING IN MASONRY

Use carbide tipped masonry bits. Refer to Drilling section. Keep even force on the drill but not so much that you crack the brittle material. A smooth, even flow of dust indicates the proper drilling rate.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents VEA EL Español EN LA Contraportada Save this Manual for Future ReferenceWork area safety General Safety RulesSpecific Safety Rules Lay on the skin may promote absorption of harmful chemicals Safety Guidelines DefinitionsFunctional Description Figure a Important Safety Instructions for Battery Chargers Read ALL Instructions Important Safety Instruction for Battery PacksIntroduction Replace Pack Charging ProcedureCharge Indicators Storage RecommendationsImportant Charging Notes Leaving the Battery in the ChargerTo Maximize Battery Life Safety Warnings and Instructions DrillsOperating Instructions Drilling in Wood MaintenanceScrew Driving DrillingRbrc Seal TroubleshootingProblem Possible Cause Possible Solution AccessoriesFull TWO-YEAR Home USE Warranty Service InformationConserver CE Manuel Pour UN Usage Ultérieur Mode D’EMPLOIConserver CES Directives Règles DE Sécurité Générales90520993 VPX1201 VPX Dril#E4FEB 7/11/07 948 AM Consignes DE Sécurité Particulières Description fonctionnelle Lire Toutes LES Directives Directives DE Sécurité Importantes Pour LES BLOCS-PILESRemplacer le bloc-piles Recommandations EN Matière DE RangementProcédure DE Charge Voyants DE ChargeRemarques Importantes Pour LE Chargement Guirlande Figure CBLOC-PILES Laissé Dans LE Chargeur Fonctionnement Perçage Bouton DE Sélection DE Vitesse ÉLEVÉE/BASSE Figure HMandrin Sans CLÉ Figure VissageDépannage Perçage Dans LE MétalPerçage Dans LA Maçonnerie EntretienInformation SUR LES Réparations AccessoiresConserve Este Manual Para Futuras Consultas Manual DE InstruccionesGuarde Este Manual Para Futuras Consultas Normas Generales DE Seguridad90520993 VPX1201 VPX Dril#E4FEB 7/11/07 948 AM Normas Específicas DE Seguridad Descripción funcional Introducción Recomendaciones CON Respecto AL Almacenamiento LEA Todas LAS InstruccionesDejar EL Paquete DE Baterías EN EL Cargador Procedimiento DE CargaIndicadores DE Carga Cadena DE Margarita Figura CInstrucciones Y Advertencias DE Seguridad Taladros Instrucciones DE OperaciónPara Maximizar LA Vida DE LA Batería Portabrocas SIN Llave Figura Interruptor Disparador Y Botón DE Inversión Figura FControl DE Torsión Figura G Selector DE Velocidad ALTA/BAJA Figura HTaladrado EN Metal DestornilladoTaladrado Taladrado EN MaderaAccesorios Detección DE ProblemasProblema Causa posible Solución posible Garantía Completa DE DOS Años Para USO EN EL Hogar Información DE MantenimientoEspecificaciones

VPX1201 specifications

The Black & Decker VPX1201 is a versatile and powerful vacuum cleaner designed for both home and office use. This innovative device combines robust suction capabilities with a lightweight and ergonomic design, making it ideal for efficient cleaning in various settings.

One of the standout features of the VPX1201 is its powerful motor, which offers impressive suction strength. This enables the vacuum to pick up dirt, debris, and pet hair from a range of surfaces, from carpets to hardwood floors. The device is equipped with a high-efficiency filter that traps fine dust particles, ensuring that the air remains clean and fresh during and after cleaning.

The VPX1201 also boasts a versatile design with multiple cleaning modes. With a simple switch, users can transition from vacuuming carpets to hard flooring, optimizing performance based on the cleaning surface. This adaptability makes it suitable for a wide range of cleaning tasks, whether for daily maintenance or deep cleaning sessions.

Portability is another significant characteristic of the Black & Decker VPX1201. It is designed to be lightweight and easy to maneuver, which is especially beneficial for reaching tight spaces and corners. The vacuum is equipped with a long power cord that allows users to cover larger areas without needing to switch outlets frequently.

Additionally, the vacuum features a bagless design, which simplifies maintenance and reduces costs associated with purchasing replacement bags. The easy-to-empty dust cup can be quickly removed and emptied, making cleanup a breeze. This user-friendly approach is complemented by a set of onboard tools that enhance the vacuum's versatility.

Among these tools is a crevice tool for tight spaces, a brush attachment for upholstery, and a dusting brush for delicate surfaces. These accessories make the Black & Decker VPX1201 a comprehensive cleaning solution for various needs.

Moreover, the vacuum's design is complemented by a modern aesthetic, ensuring that it not only performs well but also looks good in any environment. Its compact build allows for easy storage, making it an excellent addition to any cleaning arsenal.

In summary, the Black & Decker VPX1201 stands out for its powerful suction, versatile cleaning modes, lightweight design, and bagless convenience. With its array of onboard tools and modern aesthetic, it caters to diverse cleaning needs, making it a practical choice for users who demand efficiency and ease of use in their cleaning appliances.
Top Page Image Contents