Black & Decker VPX1201 Leaving the Battery in the Charger, Important Charging Notes

Page 9

90520993 VPX1201 VPX Dril#E4FEB 7/11/07 9:48 AM Page 9

was plugged into a sperate outlet therefore a battery can be removed from anywhere along the daisy chain without affecting the other chargers.

LEAVING THE BATTERY IN THE CHARGER

The charger and battery pack can be left connected indefinitely with the LED illuminated. You may see the LED return to flashing (charging) state, as the charger will occasionally “top off “ the battery charge.

IMPORTANT CHARGING NOTES

1.Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

Note: The charger will not charge a battery pack if the pack temperature is below approximately 32°F (0°C) or above 122°F (50°C). The battery pack should be left in the charger and the charger will begin to charge automatically when the cell temperature warms up or cools down.

2.The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

3.If the battery pack does not charge properly:

a.Check current at receptacle by plugging in a lamp or other appliance

b.Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

c.Move charger and battery pack to a location where the surrounding air temperature is approximately 65°F - 75°F (18°- 24°C).

d.If charging problems persist, take the tool, battery pack and charger to your local service center.

4.The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also charge a partially used pack whenever you desire with no adverse affect on the battery pack.

5.Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

6.Do not freeze or immerse charger in water or any other liquid.

WARNING: Shock hazard. Do not allow any liquid to get inside charger.

CAUTION: Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.

TO MAXIMIZE BATTERY LIFE:

1.Remove the batteries from the charger after the charging is completed.

2.Store the batteries at room temperature or below.

3.Recharge discharged batteries within 1 week. Battery life will be greatly diminished if the battery sits too long after being discharged.

SAFETY WARNINGS AND INSTRUCTIONS: DRILLS

1.Hold drill firmly with one hand on the grip and the other hand on the bottom of the tool.

2.When attaching accessories in the drill chuck, hand tighten the keyless chuck firmly.

WARNING: Drill may stall (if overloaded or improperly used) causing a twist. Always expect the stall. Grip the drill firmly with both hands to control the twisting action and prevent loss of control which could cause personal injury. If a stall does occur, release the trigger immediately and determine the reason for the stall before re-starting.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents VEA EL Español EN LA Contraportada Save this Manual for Future ReferenceWork area safety General Safety RulesSpecific Safety Rules Lay on the skin may promote absorption of harmful chemicals Safety Guidelines DefinitionsFunctional Description Figure a Important Safety Instructions for Battery Chargers Important Safety Instruction for Battery Packs IntroductionRead ALL Instructions Charge Indicators Charging ProcedureStorage Recommendations Replace PackTo Maximize Battery Life Leaving the Battery in the ChargerSafety Warnings and Instructions Drills Important Charging NotesOperating Instructions Screw Driving MaintenanceDrilling Drilling in WoodProblem Possible Cause Possible Solution TroubleshootingAccessories Rbrc SealFull TWO-YEAR Home USE Warranty Service InformationConserver CE Manuel Pour UN Usage Ultérieur Mode D’EMPLOIConserver CES Directives Règles DE Sécurité Générales90520993 VPX1201 VPX Dril#E4FEB 7/11/07 948 AM Consignes DE Sécurité Particulières Description fonctionnelle Lire Toutes LES Directives Directives DE Sécurité Importantes Pour LES BLOCS-PILESProcédure DE Charge Recommandations EN Matière DE RangementVoyants DE Charge Remplacer le bloc-pilesGuirlande Figure C BLOC-PILES Laissé Dans LE ChargeurRemarques Importantes Pour LE Chargement Fonctionnement Mandrin Sans CLÉ Figure Bouton DE Sélection DE Vitesse ÉLEVÉE/BASSE Figure HVissage PerçagePerçage Dans LA Maçonnerie Perçage Dans LE MétalEntretien DépannageInformation SUR LES Réparations AccessoiresConserve Este Manual Para Futuras Consultas Manual DE InstruccionesGuarde Este Manual Para Futuras Consultas Normas Generales DE Seguridad90520993 VPX1201 VPX Dril#E4FEB 7/11/07 948 AM Normas Específicas DE Seguridad Descripción funcional Introducción Recomendaciones CON Respecto AL Almacenamiento LEA Todas LAS InstruccionesIndicadores DE Carga Procedimiento DE CargaCadena DE Margarita Figura C Dejar EL Paquete DE Baterías EN EL CargadorInstrucciones DE Operación Para Maximizar LA Vida DE LA BateríaInstrucciones Y Advertencias DE Seguridad Taladros Control DE Torsión Figura G Interruptor Disparador Y Botón DE Inversión Figura FSelector DE Velocidad ALTA/BAJA Figura H Portabrocas SIN Llave FiguraTaladrado DestornilladoTaladrado EN Madera Taladrado EN MetalDetección DE Problemas Problema Causa posible Solución posibleAccesorios Garantía Completa DE DOS Años Para USO EN EL Hogar Información DE MantenimientoEspecificaciones

VPX1201 specifications

The Black & Decker VPX1201 is a versatile and powerful vacuum cleaner designed for both home and office use. This innovative device combines robust suction capabilities with a lightweight and ergonomic design, making it ideal for efficient cleaning in various settings.

One of the standout features of the VPX1201 is its powerful motor, which offers impressive suction strength. This enables the vacuum to pick up dirt, debris, and pet hair from a range of surfaces, from carpets to hardwood floors. The device is equipped with a high-efficiency filter that traps fine dust particles, ensuring that the air remains clean and fresh during and after cleaning.

The VPX1201 also boasts a versatile design with multiple cleaning modes. With a simple switch, users can transition from vacuuming carpets to hard flooring, optimizing performance based on the cleaning surface. This adaptability makes it suitable for a wide range of cleaning tasks, whether for daily maintenance or deep cleaning sessions.

Portability is another significant characteristic of the Black & Decker VPX1201. It is designed to be lightweight and easy to maneuver, which is especially beneficial for reaching tight spaces and corners. The vacuum is equipped with a long power cord that allows users to cover larger areas without needing to switch outlets frequently.

Additionally, the vacuum features a bagless design, which simplifies maintenance and reduces costs associated with purchasing replacement bags. The easy-to-empty dust cup can be quickly removed and emptied, making cleanup a breeze. This user-friendly approach is complemented by a set of onboard tools that enhance the vacuum's versatility.

Among these tools is a crevice tool for tight spaces, a brush attachment for upholstery, and a dusting brush for delicate surfaces. These accessories make the Black & Decker VPX1201 a comprehensive cleaning solution for various needs.

Moreover, the vacuum's design is complemented by a modern aesthetic, ensuring that it not only performs well but also looks good in any environment. Its compact build allows for easy storage, making it an excellent addition to any cleaning arsenal.

In summary, the Black & Decker VPX1201 stands out for its powerful suction, versatile cleaning modes, lightweight design, and bagless convenience. With its array of onboard tools and modern aesthetic, it caters to diverse cleaning needs, making it a practical choice for users who demand efficiency and ease of use in their cleaning appliances.
Top Page Image Contents