DeWalt DW100-220 manual Motor Brushes, Switches, Operation, Drilling

Page 5

383945/DW100-220 5/3/02 1:15 PM Page 2

English

center. Do not use tool if switch does not turn it on and off.

CAUTION: When drilling or driving into walls, floors or wherever live electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL! Hold the tool only by insulated grasping surfaces to prevent electric shock if you drill or drive into a live wire.

SAVE THESE INSTRUCTIONS

Motor Brushes

DEWALT uses an advanced brush system which automatically stops the drill when the brushes wear out. This prevents serious damage to the motor.

Switches

To start drill, depress trigger switch; to stop drill, release trigger. To lock trigger in “ON” position for continuous operation, depress trigger and push up locking button “A” Figure 1, then gently release trigger. To release locking mechanism, depress trigger fully, then release it. Before using the tool (each time) be sure that the locking button release mechanism is working freely.

Do not lock the switch “ON” when drilling by hand so that you can instantly release the trigger switch if the bit binds in the hole.

The locking button is for use only when the drill is mounted in a drill press stand or otherwise held stationary.

Be sure to release the locking button before disconnecting the plug from the power supply. Failure to do so will cause the tool to start immediately the next time it is plugged in. Damage or injury could result.

THE VARIABLE SPEED TRIGGER SWITCH permits speed control – the farther the trigger is depressed, the higher the speed of the drill. NOTE: Use lower speeds for starting holes without a center punch, drilling in metal or plastics, driving screws or drilling ceramics. Higher speeds are better for drilling wood and composition boards, and for using abrasive and polishing accessories.

2

THE REVERSING LEVER is used for withdrawing bits from tight holes and removing screws. It is located above the trigger switch (Fig. 2). To reverse the motor, release the trigger switch FIRST and then push the lever to the right. After any reversing operations, return lever to forward position.

Operation

DRILLING

1.Always unplug the drill when attaching or changing bits or accessories.

2.Use sharp drill bits only. For WOOD, use twist drill bits, spade bits, power auger bits, or hole saws. For METAL, use high speed steel twist drill bits or hole saws. For MASONRY, such as brick, cement, cinder block, etc., use carbide-tipped bits.

3.Be sure the material to be drilled is anchored or clamped firmly. If drilling thin material, use a wood “back-up” block to prevent damage to the material.

FIG. 1

FIG. 2

 

REVERSING

A

LEVER

 

 

(Shown in Forward

 

Position)

Image 5
Contents 383945/DW100-220 5/3/02 115 PM DW100-220 Double Insulation Important Safety InstructionsSafety Instructions For All Tools AWG Motor Brushes SwitchesOperation DrillingDrilling in Wood Drilling in MetalDrilling in Masonry Bubble LevelAccessories Chuck InstallationChuck Key Holder Chuck RemovalMaximum Recommended Capacities Full WarrantyDAY no Risk Satisfaction Guarantee Mesures de sécurité pour tous les outils Importantes mesures de sécuritéDouble isolation Protéger la chevelure si elle est longue Interrupteurs Balais du moteurPerçage dans le métal FonctionnementPerçage dans le bois PerçageMandrin Perçage dans la maçonnerieNiveau à bulle d’air Accessoires Installation du mandrinPorte-clé du mandrin Retrait du mandrinGarantie DE Satisfaction DE 30 Jours OU Argent Remis Capacités Maximales RecommandéesGarantie complète Instrucciones de seguridad para todas Las herramientas Instrucciones importantes de seguridadDoble aislamiento Español Interruptores Carbones del motorPara Taladrar OperaciónTaladrado en metal Taladrado en mampostería Taladrado en maderaNivel de burbuja PortabrocasInstalación del portabrocas Remoción del portabrocasLubricación AccesoriosCapacidades Maximas Recomendadas ImportanteGarantía DE Satisfacción SIN Riesgo POR 30 Días Garantía Completa

DW100-220 specifications

The DeWalt DW100-220 is a high-performance power tool designed for professional tradespeople and DIY enthusiasts alike. Engineered with a robust set of features, this model showcases DeWalt’s commitment to durability, reliability, and innovation.

At its core, the DW100-220 boasts a powerful 2200W motor, delivering impressive performance across a variety of applications. This motor not only ensures efficient operation but also provides consistent torque even under heavy loads. The tool is designed for optimal power-to-weight ratio, making it manageable while still packing enough strength to tackle demanding jobs.

One of the standout features of the DW100-220 is its advanced cooling system. This technology minimizes overheating during prolonged use, allowing users to work longer without interruption. The ergonomic design of the tool further enhances user comfort, featuring a soft-grip handle that reduces fatigue during extended sessions. This focus on usability reflects DeWalt's dedication to creating tools that enhance productivity while prioritizing user comfort.

The DW100-220 is also equipped with an electronic speed control feature, which allows users to adjust the speed according to the specific needs of the task at hand. This precision makes it ideal for a variety of materials, from wood to metal, ensuring clean cuts every time. Additionally, the tool includes a built-in LED work light, illuminating the workspace and enhancing visibility in low-light conditions.

Durability is a hallmark of DeWalt tools, and the DW100-220 is no exception. Constructed with high-quality materials, this model is designed to withstand the rigors of daily use on job sites. The protective casing and reinforced components help to ensure longevity, reducing the need for frequent repairs or replacements.

Safety features are also a priority in the design of the DW100-220. A safety lock-off switch prevents accidental startups, providing peace of mind when the tool is not in use. Furthermore, the tool is compatible with a range of attachments and accessories, allowing for enhanced versatility across different projects.

Overall, the DeWalt DW100-220 stands out as a reliable, powerful, and versatile tool that meets the demands of modern construction and renovation tasks. Its combination of advanced features and user-centric design makes it a valuable addition to any toolbox, ensuring both efficiency and safety in every endeavor.