Tool Disassembly
WARNING: Always unload a powder actuated tool before disassembling, replacing barrel, cleaning, or assembling.
A. REMOVING BARREL ASSEMBLY
1.Using screwdriver, lift end of annular spring and rotate spring until key stop is
uncovered (see Figure 1). | Annular Spring |
|
Key Stop
Figure 1 - Rotating Annular Spring to Uncover Key Stop
2.Push key stop towards rear of tool and remove (see Figure 2).
Key Stop
Figure 2 - Removing Key Stop
3.Firmly grip and pull barrel assembly from the outer liner assembly.
4.Unscrew muzzle cap.
5.Pull plastic buffer out of muzzle cap (see Figure 3).
Barrel
Assembly
Plastic
Buffer
Muzzle Cap
Outer Liner
PistonAssembly
Figure 3 - Separating Barrel Assembly from Housing
6.Pull piston assembly, using moderate force, from barrel (see Figure 4).
Piston
Assembly
Barrel
Figure 4 - Removing Piston Assembly from Barrel
106763
18