Remington 500V operating instructions Powd Load Powder Loads

Page 5

Safety Precautions

POWD LOAD

POWDER LOADS

G018

3.ALWAYS store UNLOADED powder actuated tool and power loads in a locked container. Keep power loads of different power levels in separate containers.

G018

4.NEVER carry or pass a loaded powder actuated tool. NEVER point a powder actuated tool at anyone.

G 018

5.If the tool is dropped, inspect for damage and repair it before continuing to work. NEVER use a damaged tool.

G018

6.ALWAYS take precaution to maintain your balance while operating a powder actuated tool.

106763

Continued

5

Image 5

Contents Model Index Before Using Handling the Tool Safety PrecautionsPowd Load Powder Loads ? ? Know Your Fastening Base MaterialNever make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners Never use power loads in firearms Head Shank Plastic Flute WHY a Power Fastener Holds Steel Why a Power Fastener HoldsWHY a Power Fastener Holds Concrete Overdriven Power Fasteners and Piston Power Loads and Power Indicator SettingFastening Into Concrete Fastening Into SteelOperation Water 500V Parts ListCleaning and Maintenance Removing Barrel Assembly Tool DisassemblyRemoving Rocker ARM Assembly Removing Handle PAD AssemblyRemoving Rear PAD and Power Indicator Assembly Removing Firing PIN Removing Trigger and Pawl AssemblyRemoving Baffle Assembly Tool AssemblyRemoving Outer Liner Assembly from Housing Inserting Outer Liner AssemblyReplacing Advance BAR Inserting Baffle AssemblyReplacing Trigger and Pawl Assembly Replacing Firing PIN Replacing Rocker ARM AssemblyAssembling Barrel Assembly Attaching Rear PAD AssemblyAttaching Handle PAD Assembly Replacing Key Stop Problem Possible Cause Remedy Troubleshooting GuideTechnical Service Replacement Parts And AccessoriesRepair Service Warranty ServiceFasteners Parts CentralsPower load and power fastener application information Application Chart106763 106763 A. only Limited Warranty Agreement