Remington 500V operating instructions Power Loads and Fasteners

Page 9

Safety Precautions

WATER

2.Should the tool fail to fire, hold the muzzle firmly against the work surface for 30 seconds. Release the trigger and remove pressure on the tool while holding the muzzle against the work surface. Again press the tool firmly against the work surface and pull the trigger. If the tool still fails to fire, hold the tool firmly against the work surface for another 30 seconds before advancing the power load strip. Use remaining loads in strip. Discard power load strip into water or oil.

G 018

Spall Shield

3.ALWAYS use the spall shield when driving directly into concrete or steel. Always wear goggles.

GASOLINE

OLINE

G 018

G018

4.NEVER use a powder actuated tool in an explosive or flammable atmosphere or when non-sparking tools are required.

POWER LOADS AND FASTENERS

G 018

G 018

1.NEVER leave unfired power load strips on floors or work surfaces.

106763

Continued

9

Image 9

Contents Model Index Before Using Handling the Tool Safety PrecautionsPowd Load Powder Loads ? ? Know Your Fastening Base MaterialNever make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners Never use power loads in firearms Head Shank Plastic Flute Why a Power Fastener Holds WHY a Power Fastener Holds ConcreteWHY a Power Fastener Holds Steel Overdriven Power Fasteners and Piston Power Loads and Power Indicator SettingFastening Into Concrete Fastening Into SteelOperation Water 500V Parts ListCleaning and Maintenance Removing Barrel Assembly Tool DisassemblyRemoving Handle PAD Assembly Removing Rear PAD and Power Indicator AssemblyRemoving Rocker ARM Assembly Removing Firing PIN Removing Trigger and Pawl AssemblyRemoving Baffle Assembly Tool AssemblyRemoving Outer Liner Assembly from Housing Inserting Outer Liner AssemblyInserting Baffle Assembly Replacing Trigger and Pawl AssemblyReplacing Advance BAR Replacing Firing PIN Replacing Rocker ARM AssemblyAttaching Rear PAD Assembly Attaching Handle PAD AssemblyAssembling Barrel Assembly Replacing Key Stop Problem Possible Cause Remedy Troubleshooting GuideTechnical Service Replacement Parts And AccessoriesRepair Service Warranty ServiceFasteners Parts CentralsPower load and power fastener application information Application Chart106763 106763 A. only Limited Warranty Agreement